483C Series 8-channel Signal Conditioners

The 483C series of signal conditioners are 8-channel rack mount units that are capable of powering a wide variety of sensor types. The series includes basic stand-alone units as well as units with higher level functionality. Input fault and overload LED indicators are included on the front panel of all models. Features of the individual models are listed below.

Basic ICP® Signal Conditioners

Model 483C05

Sensor input type: ICP®

Features:

  • Adjustable ICP® current
  • Unity gain
  • Ready to use functionality

Model 483C15

Sensor input type: ICP®, Voltage

Features:

  • x1, x10, x100 jumper selectable gain
  • Adjustable ICP® current
  • Optional input filtering

Advanced ICP® Signal Conditioners

Model 483C50

Sensor input type: ICP®, Voltage

Features:

  • Incremental voltage gain: x.1 to x200
  • Ethernet port for computer control
  • Optional input/output filtering
  • TEDS sensor support

Models 483C30, 483C40

Model 483C41

Dual Mode Charge Signal Conditioners

Model 483C30

Sensor input type: Charge, ICP®, Voltage

Features:

  • Charge conversion: .1, 1, 10 mV/pC
  • Incremental voltage gain: x.1 to x200
  • Selectable input ground isolation
  • Internal calibration signal for end-to-end testing of output cable to data aquisition system
  • Ethernet port for computer control
  • 10 kHz low pass output filter
  • TEDS sensor support

Model 483C40

Sensor input type: Charge, ICP®, Voltage

Features:

  • Charge conversion: .01 to 2000 mV/pC
  • Incremental voltage gain: x.1 to x200
  • Ethernet port for computer control
  • Selectable low pass input filter
  • TEDS sensor support

Model 483C41

Sensor input type: Charge, ICP®, Voltage

Features:

  • Charge conversion: .01 to 2000 mV/pC
  • Incremental voltage gain: x.1 to x200
  • Front panel keypad/display
  • Ethernet port for computer control
  • Selectable low pass input filter
  • TEDS sensor support

Dual Mode Bridge Signal Conditioner

Model 483C28

Sensor input type: Bridge/Differential, ICP®, Voltage

Features:

  • AC/DC coupling
  • Auto balance & Auto zero
  • Incremental gain
    • x.1 to x200 (ICP®/Volt.)
    • x.1 to x2000 (Brdg./Diff.)
  • Ethernet port for computer control
  • Optional input/output filtering
  • TEDS sensor support

Basic ICP® Signal Conditioners

Model 483C05

Sensor input type: ICP®

Features:

  • Adjustable ICP® current
  • Unity gain
  • Ready to use functionality

Model 483C15

Sensor input type: ICP®, Voltage

Features:

  • x1, x10, x100 jumper selectable gain
  • Adjustable ICP® current
  • Optional input filtering

Advanced ICP® Signal Conditioners

Model 483C50

Sensor input type: ICP®, Voltage

Features:

  • Incremental voltage gain: x.1 to x200
  • Ethernet port for computer control
  • Optional input/output filtering
  • TEDS sensor support

Models 483C30, 483C40

Model 483C41

Dual Mode Charge Signal Conditioners

Model 483C30

Sensor input type: Charge, ICP®, Voltage

Features:

  • Charge conversion: .1, 1, 10 mV/pC
  • Incremental voltage gain: x.1 to x200
  • Selectable input ground isolation
  • Internal calibration signal for end-to-end testing of output cable to data aquisition system
  • Ethernet port for computer control
  • 10 kHz low pass output filter
  • TEDS sensor support

Model 483C40

Sensor input type: Charge, ICP®, Voltage

Features:

  • Charge conversion: .01 to 2000 mV/pC
  • Incremental voltage gain: x.1 to x200
  • Ethernet port for computer control
  • Selectable low pass input filter
  • TEDS sensor support

Model 483C41

Sensor input type: Charge, ICP®, Voltage

Features:

  • Charge conversion: .01 to 2000 mV/pC
  • Incremental voltage gain: x.1 to x200
  • Front panel keypad/display
  • Ethernet port for computer control
  • Selectable low pass input filter
  • TEDS sensor support

Dual Mode Bridge Signal Conditioner

Model 483C28

Sensor input type: Bridge/Differential, ICP®, Voltage

Features:

  • AC/DC coupling
  • Auto balance & Auto zero
  • Incremental gain
    • x.1 to x200 (ICP®/Volt.)
    • x.1 to x2000 (Brdg./Diff.)
  • Ethernet port for computer control
  • Optional input/output filtering
  • TEDS sensor support
Compare selected models ()
[ clear compare ]
Mouse Over Image for Product Description.
loading