Technical Notes


Vibration

Title:

TN-2 - Series 3700 Capacitive Accelerometer Self-Test Feature

Title:

TN-3 - Testing the Gemini 8m Telescopes using PCB Accelerometers

Title:

TN-4 - Using the Bias Voltage as a Diagnostic Tool

Title:

TN-5 - Mounting Techniques

Title:

TN-6 - Powering ICP® Sensors with Signal Conditioners

Title:

TN-7 - Driving Long Cables

Title:

TN-8 - Remote Electronic Condition Monitoring Utilizing PCB® Sanitary Dynamic Pressure Sensors

Title:

TN-11 - Shock and Blast Measurement - Rise Time Capability of Measurement Systems?

Title:

TN-16 - PLACEBO TRANSDUCERS: A TOOL FOR DATA VALIDATION

Title:

TN-17 - ACCELEROMETER SELECTION CONSIDERATIONS: Charge and ICP® Integrated Circuit Piezoelectric

Title:

TN-19 - The Shock Spectrum: What Is It?

Title:

TN-20 - DATA VALIDATION: A PREREQUISITE TO PERFORMING DATA UNCERTAINTY ANALYSIS

Title:

TN-23 - PYROSHOCK EXPLAINED

Title:

TN-24 - Selecting Accelerometers for and Assessing Data from Mechanical Shock Measurements

Title:

TN-25 - How High in Frequency Are Accelerometer Measurements Meaningful

Title:

TN-26 - Why is MEMS the Preferred Technology for High Shock Measurement?

Title:

TN-27 - Measuring Static Overpressures in Air Blast Environments

Title:

TN-30 - What is wrong with my Piezoelectric Accelerometer?

Title:

TN-32 - How Impedance Relationships Influence Measurements Results

Title:

TN-33 - The Instrumentation Cable: Critical but Often Neglected

Title:

TN-34 - Cause of and Solution for Cable Generated Noise in Accelerometer Signals

Title:

TN-38 - Modal Testing to Improve Team Icewave's Battle Performance

Title:

TN-39 - Handling Piezoresistive Shock Accelerometers

Title:

TN-40 - Monitoring Structural Dynamics with A Microphone

Title:

TN-42 - Load Cell & Torque Sensor Technical Information

Pressure

Title:

TN-12 - Introduction to Air Blast Measurements Part I

Title:

TN-13 - Introduction to Air Blast Measurements - Part II: Interfacing the Transducer

Title:

TN-15 - DYNAMIC PRESSURE CALIBRATION

Title:

TN-18 - Introduction to Air Blast Measurements Part III: Guaranteeing that Validated Pressure Measurements are Acquired

Title:

TN-21 - Introduction to Air Blast Measurements - Part IV: Getting the Signal Down the Cable

Title:

TN-22 - Introduction to Air Blast Measurements - Part V: Alternate Technologies?

Title:

TN-28 - Measuring Underwater Explosions: Transducers and Their Application

Title:

TN-29 - Guidance for the Filtering of Dynamic Force, Pressure, Acceleration (and Other) Signals

Title:

TN-31 - Air Blast and the Science of Dynamic Pressure Measurements

Force

Title:

TN-41 - PCB Series 240 Industrial Strain Sensors

Title:

TN-9 - Shunt Calibration of a Strain Gage Sensor

Title:

TN-37 - Static Preloading of 1-DOF & 3-DOF Force Ring Sensors

Legacy

Title:

TN-1 - Series 3700 Capacitive Accelerometers Operating Principle

Title:

TN-15 - DYNAMIC PRESSURE CALIBRATION

Title:

TN-36 - Why PCB for Strain Gage Load Cells?