DIN Rail ICP® Signal Conditioners for Process Monitoring

Support Module for Dynamic Force and Strain Sensors

DIN rail ICP® signal conditioners support cyclic process monitoring by enabling dynamic force and strain measurements to be used within automation systems. They provide the interface between ICP® sensors and control-system inputs, making cycle-based measurements practical in industrial environments.

Designed for permanent installation, these units are well suited for applications where peak capture, cycle timing, and signal stability are critical to process verification. Their analog outputs allow dynamic measurement to be consistently captured and evaluated within automated machinery.

Signal Conditioning for Repetitive Machine Operations

Featured Model: 410D01 – Single-Channel ICP® Signal Conditioner

Model 410D01 is a single-channel DIN rail signal conditioner designed for dynamic force and strain measurement in repetitive machine operations. Its refined design provides lower broadband noise, expanded temperature range, and an additional output to support stable integration with control systems.

Key Capabilities

  • Conditions signals from ICP® force and strain sensors
  • Provides Waveform, Peak Track Hold, and Zero Clamp analog outputs
  • Reset synchronized with machine cycle timing
  • USB configuration with built-in signal viewing
  • Operates from 24 VDC power on standard 35 mm DIN rail

The 410D01 supports process monitoring in applications where a dynamic event must be verified without exceeding limits. Peak capture confirms that an operation occurred correctly, while waveform output supports trend monitoring or signature comparison.

Selectable gain, coupling, and reset timing allow the signal conditioner to be tuned to specific process requirements within automation and control systems.

Typical Applications

  • Force and strain monitoring in crimping, pressing, stamping, and bending
  • Monitoring electromechanical or hydraulic systems (force vs. time)
  • Robotics gripper and end effector tactile feedback
  • Fatigue and impulse testing systems

Choose PCB Piezotronics for Reliable ICP® Signal Conditioning

Ensure dynamic force and strain signals are properly conditioned and delivered to your control system for reliable cycle verification. Contact us to discuss your application or request a quote today.