Products

8-channel, line-powered, icp® sensor signal cond., internal jumper selectable gain x1, x10, x100, rack mount

SIGNAL CONDITIONER

Model 483C15

Retrieving Price...

(Pricing valid only in the U.S.)

Add to Cart
Units in Stock Lead Times
More on the way Lead Time for 1-3 is 4 Wks.
Lead Time for 3-5 is 6 Wks.
  • CE
  • IP

8-channel, line-powered, ICP® sensor signal cond., internal jumper selectable gain x1, x10, x100, rack mount

  • Sensor Input Type(s): ICP®, Voltage
  • Channels: 8
  • Voltage Gain: (±1%)x1, x10, x100
  • Power Required: AC Power

Specification Notes

[1] Jumper selectable on internal circuit board.
[2] The low frequency tolerance is accurate within ±25% of the specified frequency.
[3] Un-buffered output, read out device input impedance affects discharge time constant and low frequency response of unit.
[4] Typical.
[1] Jumper selectable on internal circuit board.
[5] User adjustable, factory set at 4 mA (± 0.5 mA). Each control adjusts 4 channels.
[2] The low frequency tolerance is accurate within ±25% of the specified frequency.
[3] Un-buffered output, read out device input impedance affects discharge time constant and low frequency response of unit.
[6] See PCB Declaration of Conformance PS024 for details.

English: SI:
Performance
Channels 8 8
Sensor Input Type(s) ICP®, Voltage ICP®, Voltage [1]
Voltage Gain (±1 %) (at 500 Hz) x1, x10, x100 x1, x10, x100 [1]
Output Range (Maximum) ±10 V ±10 V
Low Frequency Response (-5 %) 0.05 Hz 0.05 Hz [2] [3]
High Frequency Response (-3 dB) (x100) >50000 Hz >50000 Hz
High Frequency Response (-5 %) (x100) >17 kHz >17 kHz
High Frequency Response (-5 %) (x10) >40 kHz >40 kHz
High Frequency Response (-5 %) (x1) >100 kHz >100 kHz
High Frequency Response (-3 dB) (x1,x10) >100 kHz >100 kHz
Phase Response (at 1 kHz) ±1 ° ±1 °
Cross Talk (maximum) -72 dB -72 dB
Fault/Bias Monitor/Meter (LED) Open/Short/Overload Open/Short/Overload
Environmental
Temperature Range (Operating) +32 to +122 °F 0 to +50 °C
Electrical
Power Required AC Power AC Power
AC Power (47 to 63 Hz) 100 to 240 VAC 100 to 240 VAC
AC Power ≤0.7 Amps ≤0.7 Amps
Excitation Voltage (±1 VDC) (To Sensor) +26 VDC +26 VDC
DC Offset <20 mV <20 mV
Constant Current Excitation (To Sensor) 0 to 20 mA 0 to 20 mA [5]
Discharge Time Constant (0 to 50 %) >7 sec >7 sec [2] [3]
Broadband Electrical Noise (1 to 10000 Hz) (Gain x1) 5.6 µV rms 5.6 µV rms [4]
Spectral Noise (1 Hz) 0.67 µV/√Hz 0.67 µV/√Hz [4]
Spectral Noise (10 Hz) 0.10 µV/√Hz 0.10 µV/√Hz [4]
Spectral Noise (100 Hz) 0.06 µV/√Hz 0.06 µV/√Hz [4]
Spectral Noise (1 kHz) 0.06 µV/√Hz 0.06 µV/√Hz [4]
Spectral Noise (10 kHz) 0.05 µV/√Hz 0.05 µV/√Hz [4]
Broadband Electrical Noise (1 to 10000 Hz) (Gain x10) 21 µV/rms 21 µV/rms [4]
Spectral Noise (1 Hz) 5.10 µV/√Hz 5.10 µV/√Hz [4]
Spectral Noise (10 Hz) 0.60 µV/√Hz 0.60 µV/√Hz [4]
Spectral Noise (100 Hz) 0.22 µV/√Hz 0.22 µV/√Hz [4]
Spectral Noise (1 kHz) 0.22 µV/√Hz 0.22 µV/√Hz [4]
Spectral Noise (10 kHz) 0.19 µV/√Hz 0.19 µV/√Hz [4]
Broadband Electrical Noise (1 to 10000 Hz) (Gain x100) 165 µV/rms 165 µV/rms [4]
Spectral Noise (1 Hz) 57 µV/√Hz 57 µV/√Hz [4]
Spectral Noise (10 Hz) 5.2 µV/√Hz 5.2 µV/√Hz [4]
Spectral Noise (100 Hz) 1.7 µV/√Hz 1.7 µV/√Hz [4]
Spectral Noise (1 kHz) 1.8 µV/√Hz 1.8 µV/√Hz [4]
Spectral Noise (10 kHz) 1.4 µV/√Hz 1.4 µV/√Hz [4]
Overload Threshold (±1.0 Vpk) ±10/5 Vpk ±10/5 Vpk [1]
Physical
Electrical Connector (ICP® Sensor Input) BNC Jack BNC Jack
Electrical Connector (Output) BNC Jack BNC Jack
Electrical Connector (AC Power Input) IEC 320 IEC 320
Size - Height (nominal ) 1.75 in 44.5 mm
Size - Width (nominal ) 19 in 482.6 mm
Size - Depth (nominal ) 13.7 in 348 mm
Weight 6.25 lb 2.83 kg

* All specifications are at room temperature unless otherwise specified.

Accessories
Supplied
017AXX 1