Intrinsically-safe vibration sensor, 4 to 20 mA output, 0 to 1.0 in/sec RMS, 10 to 1k Hz, top exit, 2-pin conn
- Measurement Range:
0.0 to 1 in/sec rms
(
0.0 to 25.4 mm/s rms)
- Output:
4-20 mA
- Frequency Range:
(±10%)600 to 60000 cpm
(
10 to 1 kHz)
- Sensing Element:
Ceramic
- Weight:
4.7 oz
(
131 gm)
|
English: |
SI: |
|
Performance |
Measurement Range |
0.0 to 1 in/sec rms |
0.0 to 25.4 mm/s rms |
[
3]
|
Output |
4-20 mA |
4-20 mA |
|
Frequency Range (±10 %) |
600 to 60000 cpm |
10 to 1 kHz |
[
1]
[
2]
|
Broadband Resolution |
0.005 in/sec rms |
0.13 mm/s rms |
[
4]
|
Non-Linearity |
±1 % |
±1 % |
|
Environmental |
Temperature Range |
-40 to 185 °F |
-40 to 85 °C |
|
Enclosure Rating |
IP68 |
IP68 |
|
Electrical |
Excitation Voltage |
12 to 30 VDC |
12 to 30 VDC |
|
Settling Time (within 2% of value) |
<15 sec |
<15 sec |
|
Electrical Isolation (Case) |
>100000000 Ohm |
>100000000 Ohm |
|
Physical |
Size - Hex |
1.0 in |
25.4 mm |
|
Size - Height |
2.6 in |
66 mm |
|
Weight |
4.7 oz |
131 gm |
|
Mounting Thread |
1/4-28 UNF |
No Metric Equivalent |
|
Mounting Torque |
3 to 5 ft-lb |
4 to 7 Nm |
|
Sensing Element |
Ceramic |
Ceramic |
|
Sensing Geometry |
Shear |
Shear |
|
Housing Material |
Stainless Steel |
Stainless Steel |
|
Sealing |
Welded Hermetic |
Welded Hermetic |
|
Electrical Connector |
2-Pin MIL-C-5015 |
2-Pin MIL-C-5015 |
|
Electrical Connection Position |
Top |
Top |
|
Electrical Connections (Pin A) |
4-20 mA Pos (+) |
4-20 mA Pos (+) |
|
Electrical Connections (Pin B) |
4-20 mA Neg (-) |
4-20 mA Neg (-) |
|
* All specifications are at room temperature unless otherwise specified
.
Specification Notes
[
1]
1Hz = 60 cpm (cycles per minute).
[
2]
Current will fluctuate at frequencies below 5 Hz.
[
3]
Conversion Factor 1 in/sec = 0.0254 m/sec.
[
4]
Typical.
[
5]
See PCB Declaration of Conformance PS039 or PS053 for details.
Accessories
|
|
|
Supplied |
081A40 |
Mounting stud, 1/4-28 x 0.438" long stainless steel screw with hex socket and brass tip |
1 |
ICS-4 |
NIST-traceable single axis amplitude response cal from 0 to +10% freq. (for 4 to 20 mA sensors) |
1 |
Optional Versions
(
EX )
Hazardous Area Approval- contact factory for specific approvals
Hazardous Area Approval |
EEx ia IIC T4, -40 ° C ≤ Ta ≤ 80 ° C, II 1 G |
Hazardous Area Approval |
EEx nL IIC T4, -40 ° C ≤ Ta ≤ 80 ° C, II 3 G |
Hazardous Area Approval |
DIV I, CL I, II, III, GRPS A-G, Exia, AExia, IIC T4 |
Hazardous Area Approval |
DIV II, CL I, GRPS A-D, ExnL, AExnA, IIC T4 |
(
M )
Metric Mount
Accessories: |
Supplied |
M081A61 |
Mounting Stud |
1 |
(
RV )
Buffered Analog Signal Output - 100 mV/g (±20%)
Electrical Connector |
3-Pin MIL-C-5015 |
Electrical Connections |
4-20 mA Pos (+) |
Electrical Connections |
4-20 mA Neg/Signal Output Neg |
Electrical Connections |
Signal Output Pos |