Platinum Stock Products; Triaxial, lightweight miniature, ceramic shear ICP® accel., 10 mV/g, 0.25" cube, no extension cable provided
- Sensitivity: (±20%)10 mV/g
(1.02 mV/(m/s²))
- Measurement Range: ±500 g pk
(±4905 m/s² pk)
- Electrical Connector: Integral Cable
Additional Configurations:
RELATED PRODUCTS
|
English: |
SI: |
|
| Performance |
| Sensitivity (±20 %) |
10 mV/g |
1.02 mV/(m/s²) |
|
| Measurement Range |
±500 g pk |
±4905 m/s² pk |
|
| Frequency Range (±5 %) (y or z axis) |
2 to 8000 Hz |
2 to 8000 Hz |
|
| Frequency Range (±5 %) (x axis) |
2 to 5000 Hz |
2 to 5000 Hz |
|
| Frequency Range (+1 dB) (x axis) |
≥8 kHz |
≥8 kHz |
|
| Resonant Frequency |
≥50 kHz |
≥50 kHz |
|
| Broadband Resolution (1) |
0.003 g rms |
0.03 m/s² rms |
[2]
|
| Non-Linearity |
≤1 % |
≤1 % |
[1]
|
| Transverse Sensitivity |
≤5 % |
≤5 % |
|
| Environmental |
| Overload Limit (Shock) |
±5000 g pk |
±49050 m/s² pk |
|
| Temperature Range (Operating) |
-65 to +250 °F |
-54 to +121 °C |
|
| Temperature Response |
See Graph %/°F |
See Graph %/°F |
[2]
|
| Electrical |
| Excitation Voltage |
22 to 30 VDC |
22 to 30 VDC |
|
| Constant Current Excitation |
2 to 20 mA |
2 to 20 mA |
|
| Output Impedance |
≤200 Ohm |
≤200 Ohm |
|
| Output Bias Voltage |
9 to 16 VDC |
9 to 16 VDC |
|
| Discharge Time Constant |
0.24 to 1.0 sec |
0.24 to 1.0 sec |
|
| Settling Time (within 10% of bias) |
<3 sec |
<3 sec |
|
| Spectral Noise (1 Hz) |
1200 µg/√Hz |
11772 (µm/sec2)/√Hz |
[2]
|
| Spectral Noise (10 Hz) |
300 µg/√Hz |
2943 (µm/sec2)/√Hz |
[2]
|
| Spectral Noise (100 Hz) |
100 µg/√Hz |
981 (µm/sec2)/√Hz |
[2]
|
| Spectral Noise (1 kHz) |
30 µg/√Hz |
294 (µm/sec2)/√Hz |
[2]
|
| Physical |
| Sensing Element |
Ceramic |
Ceramic |
|
| Sensing Geometry |
Shear |
Shear |
|
| Housing Material |
Titanium |
Titanium |
|
| Sealing |
Hermetic |
Hermetic |
|
| Size - Height |
0.25 in |
6.35 mm |
|
| Size - Length |
0.25 in |
6.35 mm |
|
| Size - Width |
0.25 in |
6.35 mm |
|
| Weight (without cable) |
0.04 oz |
1.0 gm |
[2]
|
| Electrical Connector |
Integral Cable |
Integral Cable |
|
| Electrical Connection Position |
Side |
Side |
|
| Cable Termination |
1/4-28 4-Pin Jack |
1/4-28 4-Pin Jack |
|
| Cable Length |
5 ft |
1.5 m |
|
| Cable Type |
034 4-cond Shielded |
034 4-cond Shielded |
|
| Mounting |
Adhesive |
Adhesive |
|
* All specifications are at room temperature unless otherwise specified
.
Specification Notes
[1] Zero-based, least-squares, straight line method.
[2] Typical.
[3] See PCB Declaration of Conformance PS023 for details.
Accessories
|
|
|
| Supplied |
| 034G05 |
4-conductor, low noise, shielded FEP cable, 5-ft, 4-socket plug to (3) BNC plugs (labeled X Y Z) |
1 |
| 080A109 |
Petro Wax, one square, 1" x 1" x 0.25" |
1 |
| 080A90 |
Quick bond Gel (for use with accel adhesive mtg bases to fill gaps on rough surfaces) |
1 |
| ACS-1T |
Triaxial amplitude response calibration, from 10 Hz to upper 5% frequency, NIST traceable |
1 |
Optional Versions
( J ) Ground Isolated
| Weight |
.04 oz |
1.2 gm |
| Size - Height |
.28 in |
7.10 mm |
| Size - Width |
.28 in |
7.10 mm |
| Electrical Isolation |
>100000000 Ohm |
| Size - Length |
.28 in |
7.10 mm |
( W ) Water Resistant Cable
| Electrical Connector |
Sealed Integral Cable |