Model: 356A04_NC

$1,290.00 USD
(Pricing valid in US only)

Datasheet

Triaxial, lightweight miniature, ceramic shear ICP® accel., 1.0 mV/g, 0.25" cube, 5 ft. integral cable to 4-pin jack, no mating cable supplied

  • Sensitivity: (±20%) 1 mV/g (0.10 mV/(m/s²))
  • Measurement Range: ±5000 g pk (±49050 m/s² pk)
  • Frequency Range: (+/-10%) 1 to 10000 Hz (1 to 10000 Hz)
  • Electrical Connector: Integral Cable

Add this product to my product comparison
Compare selected models ()

 English:SI: 
Performance
Sensitivity (±20 %)1 mV/g0.10 mV/(m/s²) 
Measurement Range±5000 g pk±49050 m/s² pk 
Frequency Range (+/-5 %)1.2 to 6000 Hz1.2 to 6000 Hz 
Frequency Range (+/-10 %)1 to 10000 Hz1 to 10000 Hz 
Resonant Frequency≥50 kHz≥50 kHz 
Broadband Resolution (1 to 10000 Hz)0.02 g rms0.2 m/s² rms[2] 
Non-Linearity1 %1 %[1] 
Transverse Sensitivity≤5 %≤5 % 
Environmental
Overload Limit (Shock)±10000 g pk±98100 m/s² pk 
Temperature Range (Operating)-65 to +325 °F-54 to +163 °C 
Temperature ResponseSee Graph %/°FSee Graph %/°F[2] 
Base Strain Sensitivity0.05 g/µε0.5 (m/s²)/µε[2] 
Electrical
Excitation Voltage18 to 30 VDC18 to 30 VDC 
Constant Current Excitation2 to 20 mA2 to 20 mA 
Output Impedance≤100 Ohm≤100 Ohm 
Output Bias Voltage8 to 12 VDC8 to 12 VDC 
Discharge Time Constant0.4 to 1.2 sec0.4 to 1.2 sec 
Settling Time (within 10% of bias)<3 sec<3 sec 
Spectral Noise (1 Hz)4.7 mg/√Hz46 mm/s2/√Hz[2] 
Spectral Noise (10 Hz)1.2 mg/√Hz11.8 mm/s2/√Hz[2] 
Spectral Noise (100 Hz)0.48 mg/√Hz4.71 mm/s2/√Hz[2] 
Spectral Noise (1 kHz)0.17 mg/√Hz1.67 mm/s2/√Hz[2] 
Spectral Noise (10 kHz)0.13 mg/√Hz1.28 mm/s2/√Hz[2] 
Physical
Sensing ElementCeramicCeramic 
Sensing GeometryShearShear 
Housing MaterialTitaniumTitanium 
SealingHermeticHermetic 
Size - Height0.25 in6.35 mm 
Size - Length0.25 in6.35 mm 
Size - Width0.25 in6.35 mm 
Weight (without cable)0.03 oz0.8 gm[2] 
Electrical ConnectorIntegral CableIntegral Cable 
Electrical Connection PositionSideSide 
Cable Termination1/4-28 4-Pin Jack1/4-28 4-Pin Jack 
Cable Length5 ft1.5 m 
Cable Type019 4-cond Shielded019 4-cond Shielded 
MountingAdhesiveAdhesive 

All specifications are at room temperature unless otherwise specified.


CE

Product Notes
[1] Zero-based, least-squares, straight line method.
[2] Typical.
[3] See PCB Declaration of Conformance PS023 for details.
Accessories:
Supplied
034G054-cond. shielded cable, 5 ft (1.5M), 4-pin plug to (3) BNC plugs(1)
080A109Petro Wax(1)
080A90Quick Bonding Gel(1)
ACS-1TNIST traceable triaxial amplitude response, 10 Hz to upper 5% frequency.(1)
Optional Versions:
No optional versions
PCB Miniature Accelerometers for Drop Testing