Products

triaxial, miniature (4 gm), ceramic shear icp® accel 10 mv/g, 1 to 13k hz (± 5%), teds 1.0, 5 ft attached cable, no mating cable supplied, low outgassing

TRIAXIAL ICP® ACCELEROMETER

Model 356A19/NC

Retrieving Price...

(Pricing valid only in the U.S.)

Units in Stock Lead Times
1 Call for Lead Time
  • CE
  • IP

Triaxial, miniature (4 gm), ceramic shear ICP® accel 10 mV/g, 1 to 13k Hz (± 5%), TEDS 1.0, 5 ft attached cable, no mating cable supplied, low outgassing

  • Sensitivity: (±10%)10 mV/g (1.02 mV/(m/s²))
  • Measurement Range: ±500 g pk (±4905 m/s² pk)

Specification Notes


[1] Zero-based, least-squares, straight line method.
[2] Typical.
[3] TEDS Capable Digital Memory and Communication, compliant with IEEE 1451.4
[2] Typical.
[4] See PCB Declaration of Conformance PS023 for details.

English: SI:
Performance
Sensitivity (±10 %) 10 mV/g 1.02 mV/(m/s²)
Measurement Range ±500 g pk ±4905 m/s² pk
Frequency Range (±5 %) 1 to 13000 Hz 1 to 13000 Hz
Frequency Response (±10 %) 0.6 to 15,000 Hz 0.6 to 15,000 Hz
Resonant Frequency ≥55 kHz ≥55 kHz
Broadband Resolution (1) .006 g rms .06 m/s² rms [2]
Non-Linearity ≤1 % ≤1 % [1]
Transverse Sensitivity ≤5 % ≤5 %
TEDS Compliant (Per IEEE 1451.4) Yes Yes [3]
Environmental
Overload Limit (Shock) ±10000 g pk ±98100 m/s² pk
Temperature Range (Operating) -65 to +250 °F -54 to +121 °C
Temperature Response See Graph %/°F See Graph %/°F [2]
Electrical
Excitation Voltage 18 to 30 VDC 18 to 30 VDC
Constant Current Excitation 2 to 20 mA 2 to 20 mA
Output Impedance ≤200 Ohm ≤200 Ohm
Output Bias Voltage 8 to 13 VDC 8 to 13 VDC
Discharge Time Constant 0.6 to 1.6 sec 0.6 to 1.6 sec
Settling Time (within 10% of bias) <5 sec <5 sec
Spectral Noise (1 Hz) 500 µg/√Hz 4905 (µm/sec2)/√Hz [2]
Spectral Noise (10 Hz) 160 µg/√Hz 1570 (µm/sec2)/√Hz [2]
Spectral Noise (100 Hz) 75 µg/√Hz 736 (µm/sec2)/√Hz [2]
Spectral Noise (1 kHz) 65 µg/√Hz 638 (µm/sec2)/√Hz [2]
Physical
Sensing Element Ceramic Ceramic
Sensing Geometry Shear Shear
Housing Material Titanium Titanium
Sealing Hermetic Hermetic
Size - Height 0.4 in 10.2 mm
Size - Length 0.4 in 10.2 mm
Size - Width 0.4 in 10.2 mm
Weight (without cable) 0.14 oz 4 gm [2]
Electrical Connection Position Side Side
Cable Termination 1/4-28 4-Pin Jack 1/4-28 4-Pin Jack
Cable Length 5 ft 1.5 m
Cable Type 034 4-cond Shielded 034 4-cond Shielded
Mounting Thread 5-40 Female 5-40 Female
Mounting Torque 4 to 5 in-lb 45 to 56 N-cm

* All specifications are at room temperature unless otherwise specified.

TempChart

Accessories


Supplied
034G05 4-conductor, low noise, shielded FEP cable, 5-ft, 4-socket plug to (3) BNC plugs (labeled X Y Z) 1
080A109 Petro Wax, one square, 1" x 1" x 0.25" 1
080A15 Adhesive mtg base, 0.312" hex x 0.125" thk, 5-40 tapped hole, aluminum w/isolation hardcoat finish 1
081A27 Mounting stud, 5-40 to 5-40 thds, w/o shoulder, BeCu 1
ACS-1T Triaxial amplitude response calibration, from 10 Hz to upper 5% frequency, NIST traceable 1
M081A27 Metric mtg stud, 5-40 to M3 x 0.50 long 1

Build Out Your Measurement Chain


483C15
Model: 483C15

8-channel, line-powered, ICP® sensor sig...

$2,584.00 USD

(Pricing valid only in the U.S.)

034D10
Model: 034D10

4-conductor, shielded cable, 10-ft, 4-so...

$145.00 USD

(Pricing valid only in the U.S.)

482C15
Model: 482C15

Platinum Stock Product; 4-channel, Line-...

$735.00 USD

(Pricing valid only in the U.S.)

010F10
Model: 010F10

4-conductor, shielded, FEP cable, 10-ft,...

$213.00 USD

(Pricing valid only in the U.S.)