Log In

Log In

Need an Account? Start Here


Model: 3741E12100G

Add to Cart for Quote

HIGH SENSITIVITY DC ACCEL, Differential 100G, 10 ft. intergral cable

  • Sensitivity: (±3%) 40 mV/g (4.08 mV/(m/s²))
  • Measurement Range: ±100 g pk (±981 m/s² pk)
  • Broadband Resolution: 2.8 mg rms (0.027 m/s² rms)
  • Temperature Range: -65 to 250 °F (-54.0 to 121 °C)
  • Frequency Range: (±3dB) 0 to 1250 Hz

Add this product to my product comparison
Compare selected models ()

Sensitivity (±3 %)40 mV/g4.08 mV/(m/s²)[1] 
Measurement Range±100 g pk±981 m/s² pk 
Frequency Range (±3 dB)0 to 1250 Hz0 to 1250 Hz[4] 
Frequency Range (±3 dB)0 to 2500 Hz0 to 2500 Hz[3] 
Phase Response (100 Hz)<10 °<10 ° 
Broadband Resolution (0.5 to 100 Hz)2.8 mg rms0.027 m/s² rms[3] 
Non-Linearity≤1 %≤1 %[2] 
Transverse Sensitivity≤5 %≤5 % 
Overload Limit (Shock)±5000 g pk±49050 m/s² pk 
Temperature Range (Operating)-65 to 250 °F-54.0 to 121 °C 
Temperature Range (Storage)-65 to 250 °F-54.0 to 121 °C 
Temperature Coefficient of Sensitivity±3.0 %±3.0 % 
Zero g Offset Temperature Coefficient±2.0 % FSO±2.0 % FSO[5][6] 
Base Strain Sensitivity (Measured at 250 µε).0017 g/µε.017 (m/s²)/µε[3] 
Excitation Voltage6 to 30 VDC6 to 30 VDC 
Current Consumption≤10 mA≤10 mA 
Output Impedance≤120 Ohm≤120 Ohm 
Offset Voltage±160 mVDC±160 mVDC[7] 
Common Mode Voltage (±0.1 VDC)+2.5 VDC+2.5 VDC 
Spectral Noise (1 to 100 Hz)400 µg/√Hz3924 (µm/sec2)/√Hz[3] 
Electrical Isolation (Base)>100000000 Ohm>100000000 Ohm[8] 
Housing MaterialAnodized AluminumAnodized Aluminum 
Size - Height0.30 in7.5 mm 
Size - Length1.00 in25.4 mm 
Size - Width.85 in21.6 mm 
Weight (without cable)0.35 oz9.92 gm[3] 
Electrical ConnectorIntegral CableIntegral Cable 
Electrical Connection PositionSideSide 
Cable TerminationPigtail EndsPigtail Ends 
Cable Type010 4-cond Shielded010 4-cond Shielded 
Cable Length10 ft10 ft 
MountingThrough Holes (2)Through Holes (2) 

All specifications are at room temperature unless otherwise specified.


Product Notes
[1] Measured at 100 Hz, 1 grms.
[2] Least-squares, straight line method, % FSO.
[3] Typical.
[4] Minimum, verified with Calibration data.
[5] -65 to +250 °F, ref. 75 °F (-54 to +121 °C, ref. 24 °C)
[6] FSO = Full Scale Output over the Measurement Range (8VDC).
[7] Offset tolerance is based on manufacturers supplied cable length.
[8] Case and shield to mounting surface or cable leads.
[9] See PCB Declaration of Conformance PS027 for details.
080A208Triaxial mounting block(1)
081A103Mounting screw(2)
ACS-145Phase and Amplitude Calibration from 2 Hz to ±3 dB of frequency range(1)
M081A103Mounting screw and washer, M3 x 0.5 thread(2)
Optional Versions:
No optional versions
Product Documents
Additional Downloads