Log In

Log In

Need an Account? Start Here

 

Model: 3713E1150G

$1,710.00 USD
(Pricing valid in US only)

Datasheet

Triaxial MEMS DC accelerometer, 40 mV/g, +/-50 g, +6 to 30 VDC excitation

  • Sensitivity: (±3%) 40 mV/g (4.1 mV/(m/s²))
  • Measurement Range: ±50 g pk (±490.5 m/s² pk)
  • Electrical Connector: 9-Pin
  • Weight: 0.8 oz (22.7 gm)

Add this product to my product comparison
Compare selected models ()

 English:SI: 
Performance
Sensitivity (±3 %)40 mV/g4.1 mV/(m/s²)[2] 
Measurement Range±50 g pk±490.5 m/s² pk 
Frequency Range (±3 dB)0 to 2000 Hz0 to 2000 Hz[1] 
Frequency Range (±3 dB)0 to 1000 Hz0 to 1000 Hz[4] 
Phase Response (100 Hz)<10 °<10 ° 
Non-Linearity≤1 %≤1 %[3] 
Broadband Resolution (0.5 to 100 Hz)1.0 mg rms0.010 m/s² rms[1] 
Transverse Sensitivity≤5 %≤5 % 
Environmental
Overload Limit (Shock)±5000 g pk±49050 m/s² pk 
Temperature Range (Operating)-65 to +250 °F-54.0 to +121 °C 
Temperature Range (Storage)-65 to +250 °F-54.0 to +121 °C 
Temperature Coefficient of Sensitivity±3 %±3 %[6] 
Zero g Offset Temperature Coefficient±2 % FSO±2 % FSO[5][6] 
Base Strain Sensitivity (Measured at 250 µε).001 g/µε.01 (m/s²)/µε[1] 
Magnetic Sensitivity100 µg/gauss9.8 (m/s²)/Tesla[1] 
Electrical
Excitation Voltage6 to 30 VDC6 to 30 VDC 
Current Consumption≤30 mA≤30 mA 
Output Impedance≤120 Ohm≤120 Ohm 
Offset Voltage±80 mVDC±80 mVDC[7] 
Spectral Noise (1 to 100 Hz)200 µg/√Hz1962 (µm/sec2)/√Hz[1] 
Electrical Isolation (Base)>100000000 Ohm>100000000 Ohm 
Physical
Housing MaterialTitaniumTitanium 
SealingHermeticHermetic 
Size - Length0.85 in21.6 mm 
Size - Width0.85 in21.6 mm 
Size - Height0.85 in21.6 mm 
Weight0.8 oz22.7 gm 
Electrical Connector9-Pin9-Pin 
Electrical Connection PositionSideSide 
Mounting Thread10-32 Female10-32 Female 

All specifications are at room temperature unless otherwise specified.


CE

Product Notes
[1] Typical.
[2] Measured at 100 Hz.
[3] Least-squares, straight line method, % FSO.
[4] Minimum, verified with Calibration data.
[5] FSO = Full Scale Output over the Measurement Range (4VDC).
[6] -65 to +250 °F, ref. 75 °F (-54 to +121 °C, ref. 24 °C)
[7] Offset tolerance is based on 10 ft of 037 test cable.
[8] See PCB Declaration of Conformance PS027 for details.
Accessories:
Supplied
080A12Adhesive Mounting Base(1)
081B05Mounting Stud (10-32 to 10-32)(1)
ACS-145TTriaxial Calibration Phase and Magnitude from 2 Hz to ±3dB using Linear scale(1)
M081B05Mounting Stud 10-32 to M6 X 0.75(1)
Optional Versions:
No optional versions
Product Documents
Additional Downloads