Log In

Log In

Need an Account? Start Here


Model: 3503C202KG

Add to Cart for Quote

Triaxial MEMS crash accelerometer, 2KG, surface mount technology

  • Sensitivity: (±50%) 0.10 mV/g (0.01 mV/(m/s²))
  • Measurement Range: ±2000 g (±19613 m/s² pk)
  • Frequency Range: (1dB) 0 to 10000 Hz
  • Sensing Geometry: Full Active
  • Mounting: Surface Mount
  • Weight: 0.029 oz (0.82 gm)

Add this product to my product comparison
Compare selected models ()

Sensitivity (±50 %) (at 5 VDC excitation)0.10 mV/g0.01 mV/(m/s²)[2] 
Sensitivity0.02 mV/V/g0.002 mV/V/(m/s²)[3] 
Measurement Range±2000 g±19613 m/s² pk 
Frequency Range (1 dB)0 to 10000 Hz0 to 10000 Hz[1] 
Resonant Frequency>20 kHz>20 kHz[1] 
Damping Ratio (+/-0.3 )0.7 critical0.7 critical[1] 
Non-Linearity (per 1000 g, 9810 m/s²)1 %1 % 
Transverse Sensitivity≤3 %≤3 % 
Overload Limit (Shock)±10000 g pk±98100 m/s² pk[4] 
Overload Limit (Mechanical Stops)≥2200 g≥21582 m/s² pk 
Temperature Range (Operating)-65 to 250 °F-54 to 121 °C 
Temperature Range (Storage)-65 to 150 °F-54 to 65 °C 
Temperature Coefficient of Sensitivity-0.11 %/°F-0.20 %/°C[1] 
Zero g Offset Temperature Shift±20 mV±20 mV 
Base Strain Sensitivity0.01 g/µε0.098 (m/s²)/µε[1] 
Excitation Voltage (Maximum)12 VDC12 VDC 
Current Consumption≤24 mA≤24 mA 
Input Resistance (±450 Ohm)950 Ohm950 Ohm[2] 
Output Resistance (±1250 Ohm)2750 Ohm2750 Ohm[2] 
Offset Voltage-20 to +20 mVDC-20 to +20 mVDC[2] 
Settling Time0.01 sec0.01 sec[5] 
Sensing ElementPiezoresistive MEMSPiezoresistive MEMS 
Sensing GeometryFull ActiveFull Active 
Housing MaterialCeramicCeramic 
Size - Height0.15 in3.8 mm 
Size - Length0.38 in9.6 mm 
Size - Width0.28 in7.1 mm 
Weight0.029 oz0.82 gm[1] 
Electrical ConnectorSolder TabsSolder Tabs 
MountingSurface MountSurface Mount 

All specifications are at room temperature unless otherwise specified.

Product Notes
[1] Typical.
[2] Verified with test data provided on supplied calibration certificate.
[3] Sensitivity is proportional to excitation voltage, and at other excitation values, sensitivity can be predicted from the 5VDC calibrated value with a small (<~.5%) increase in uncertainty.
[4] Half-sine pulse duration, >= 20 µsec.
[5] Settling Time is the maximum time after power-up for the Offset Voltage to be within +/-2% of Measurement Range output of the final offset value. Mounting surface must be at thermal equilibrium.
ACS-62BTShock Pulse Calibration of triaxial piezoresistive shock accelerometer to maximum amplitude of 5k g, 5.0 VDC excitation(1)
Optional Versions:
No optional versions
Product Documents
Additional Downloads