Log In

Log In

Need an Account? Start Here

 

Model: 1515-110-03A

Add to Cart for Quote

PCB L&T Pedal Force Transducer, 300 lbf (1334 N) rated capacity, 50% static overload protection, 2mV/V output, 10-foot Integral cable with open wire end, aluminum construction

  • Measurement Range: 300 lbf (1334 N)
  • Sensitivity: 2.00 mV/V
  • Size - Height: 0.84 in (21.4 mm)

Add this product to my product comparison
Compare selected models ()

 English:SI: 
Performance
Measurement Range (Full Scale Capacity)300 lbf1334 N 
Sensitivity (output at rated capacity)2.00 mV/V2.00 mV/V[1][2] 
Non-Linearity≤0.20 % FS≤0.20 % FS[2] 
Hysteresis≤0.30 % FS≤0.30 % FS[2] 
Non-Repeatability≤0.05 % FS≤0.05 % FS[2] 
Environmental
Overload Limit600 lbf2668 N 
Temperature Range (Operating)-65 to +200 °F-54 to +93 °C 
Temperature Range (Compensated)+70 to +170 °F+21 to +76 °C 
Temperature Effect on Output (Maximum)±0.002 %Reading/°F±0.0036 %Reading/°C[3] 
Temperature Effect on Zero Balance (Maximum)±0.002 %FS/°F±0.0036 %FS/°C[2] 
Electrical
Bridge Resistance700 Ohm700 Ohm[1] 
Excitation Voltage (Permitted)10 VDC10 VDC[4] 
Insulation Resistance5 GOhm5 GOhm 
Zero Balance≤5 %RO≤5 %RO 
Physical
Size - Height0.84 in21.4 mm 
Size - Width3.24 in82.3 mm 
Size - Length5.00 in127.0 mm 
Weight1.25 lb0.57 kg 
MountingStraps or Hose ClampsStraps or Hose Clamps 
Housing MaterialPlated SteelPlated Steel 
Sensing ElementStrain GageStrain Gage 
Electrical Connectorpigtail endspigtail ends 
Electrical Connection PositionSideSide 

All specifications are at room temperature unless otherwise specified.



Product Notes
[1] Nominal.
[2] FS - Full Scale.
[3] Over compensated operating temperature range.
[4] Calibrated at 10 VDC, usable 5 to 20 VDC or VAC RMS.
Accessories:
Supplied
100-10148-60Hose Clamp(2)
100-10192-90Nylon Velcro Strap - 12" Long Red(2)
52110-001200Rubber Pads - Round Top(25)
52110-003500Rubber Pads - Square Top(25)
Optional Versions:
No optional versions
Product Documents
Additional Downloads