Products

icp® quartz force ring, 10k lb comp., 0.5 mv/lb, metric

Force Sensor, ICP®

Model M202B

Retrieving Price...

(Pricing valid only in the U.S.)

Units in Stock Lead Times
More on the way Lead Time for 1-2 is 10 Wks.
  • CE
  • IP

ICP® quartz force ring, 10k lb comp., 0.5 mV/lb, Metric

  • Measurement Range: 10000 lb (44.48 kN)
  • Sensitivity: (±15%)0.50 mV/lb (112.4 mV/kN)
  • Low Frequency Response: (-5%)0.0003 Hz
  • Upper Frequency Limit: 60000 Hz
  • Temperature Range: -65 to +250 °F (-54 to +121 °C)

Specification Notes


[1] Zero-based, least-squares, straight line method.
[2] Typical.
[3] Calculated from discharge time constant.
[4] Estimated using rigid body dynamics calculations.
[2] Typical.
[5] See PCB Declaration of Conformance PS023 for details.

English: SI:
Performance
Sensitivity (±15 %) 0.50 mV/lb 112.4 mV/kN
Measurement Range (Compression) 10000 lb 44.48 kN
Maximum Static Force (Compression) 15000 lb 66.72 kN
Broadband Resolution (1) 0.20 lb-rms 0.890 N-rms [2]
Low Frequency Response (-5 %) 0.0003 Hz 0.0003 Hz [3]
Upper Frequency Limit 60000 Hz 60000 Hz [4]
Non-Linearity ≤1 % FS ≤1 % FS [1]
Environmental
Temperature Range -65 to +250 °F -54 to +121 °C
Temperature Coefficient of Sensitivity ≤0.03 %/°F ≤0.054 %/°C
Electrical
Discharge Time Constant (at room temp) ≥2000 sec ≥2000 sec
Excitation Voltage 20 to 30 VDC 20 to 30 VDC
Constant Current Excitation 2 to 20 mA 2 to 20 mA
Output Impedance ≤100 Ohm ≤100 Ohm
Output Bias Voltage 8 to 14 VDC 8 to 14 VDC
Output Polarity (Compression) Positive Positive
Physical
Preload 2000 lb 8.896 kN
Stiffness 16 lb/µin 2.8 kN/µm [2]
Size - Diameter 0.870 in 22.1 mm
Size - Height 0.390 in 9.91 mm
Size - Bolt Diameter 0.375 in 10 mm
Size - ID (Hole Diameter) 0.413 in 10.49 mm
Size - OD (Sensor) 0.870 in 22.10 mm
Size - Sensing Surface 0.665 in 16.89 mm
Weight 0.67 oz 19 gm
Housing Material Stainless Steel Stainless Steel
Sealing Hermetic Hermetic
Electrical Connector 10-32 Coaxial Jack 10-32 Coaxial Jack
Electrical Connection Position Side Side

* All specifications are at room temperature unless otherwise specified.

Accessories


Supplied
080A82 Assembly lubricant (for Series 201-207 force rings) 1
081A12 Mounting stud, 5/16-24 x 0.910", BeCu for Models 202B & 212B 1
082B02 Anti-friction washer for Models (M)202B, (M)212B, (M)260A01, (M)260A11 & (M)260A31 1
083B02 Pilot bushing for Models 202B & 212B 1

Optional Versions


(M) Metric Mount
Accessories:
Supplied M083B02 Pilot Bushing 1
Supplied M081A12 Mounting Stud, M8 x 1.00, BeCu 1

(W) Water Resistant Cable

English SI
Electrical Connector Sealed Cable
Electrical Connection Position Side

Build Out Your Measurement Chain


410C01
Model: 410C01

ICP® sensor signal cond., 35mm DIN-rail ...

$902.00 USD

(Pricing valid only in the U.S.)

202B
Model: 202B

ICP® quartz force ring, 10k lb comp., 0....

$1,015.00 USD

(Pricing valid only in the U.S.)

082B02
Model: 082B02

Anti-friction washer for Models (M)202B,...

$28.00 USD

(Pricing valid only in the U.S.)

M081A12
Model: M081A12

Mounting stud, M8x1.00 x 0.910", BeCu fo...

$42.00 USD

(Pricing valid only in the U.S.)

M083B02
Model: M083B02

Pilot bushing for Models M202B & M212B

$18.00 USD

(Pricing valid only in the U.S.)