high temp (+660 f/+349 c) pressure probe, 5000 psi, 3 pc/psi, 0.218 in dia. ss diaphragm, accel. comp., 5-point cal ranges at 5kpsi, 500psi and 100psi uht-12 element

Charge Output Pressure Sensor

Model 112A06

Retrieving Price...

(Pricing valid only in the U.S.)

Add to Cart
Units in Stock Lead Times
15 Call for Lead Time
  • CE
  • IP

High temp (+660 F/+349 C) pressure probe, 5000 psi, 3 pC/psi, 0.218 in dia. SS diaphragm, accel. comp., 5-point cal ranges at 5kpsi, 500psi and 100psi UHT-12 Element

  • Measurement Range: 5,000 psi (34,475 kPa)
  • Sensing Element: UHT-12™
  • Temperature Range: -400 to +662 °F (-240 to +350 °C)
  • Electrical Connector: 10-32 Coaxial Jack
  • Weight: 0.21 oz (6.0 gm)

Specification Notes

[1] Zero-based, least-squares, straight line method.
[2] Typical.
[3] See PCB Declaration of Conformance PS158 for details.

English: SI:
Performance
Sensitivity (±25 %) 2.6 pC/psi 0.44 pC/kPa
Sensitivity (15 %) 2.8 pC/psi 0.41 pC/kPa
Measurement Range 5,000 psi 34,475 kPa
Maximum Pressure (Total) 15,000 psi 103,421 kPa
Resonant Frequency ≥200 kHz ≥200 kHz
Rise Time (Reflected) ≤2.0 µ sec ≤2.0 µ sec
Non-Linearity ≤1.0 % FS ≤1.0 % FS [1]
Environmental
Acceleration Sensitivity ≤0.01 psi/g ≤0.007 kPa/(m/s²)
Temperature Range (Operating) -400 to +662 °F -240 to +350 °C
Temperature Response See Graph See Graph
Maximum Flash Temperature 3000 °F 1649 °C
Maximum Shock 10000 g pk 98070 m/s² pk
Electrical
Output Polarity (Positive Pressure) Negative Negative
Capacitance 66 pF 66 pF [2]
Insulation Resistance (662°F) ≥1000000000 Ohm ≥1000000000 Ohm
Insulation Resistance (Room Temp.) ≥1.0 Tohm ≥1.0 Tohm
Insulation Resistance (662°F/350°C) ≥1.0 MOhm ≥1.0 MOhm
Physical
Sensing Element UHT-12™ UHT-12™
Sensing Geometry Compression Compression
Housing Material 17-4 Stainless Steel 17-4 Stainless Steel
Diaphragm 316L Stainless Steel 316L Stainless Steel
Sealing Welded Hermetic Welded Hermetic
Electrical Connector 10-32 Coaxial Jack 10-32 Coaxial Jack
Weight 0.21 oz 6.0 gm

* All specifications are at room temperature unless otherwise specified.

TempChart

Accessories
Supplied
060A03 Clamp nut, 5/16-24-2A thd, 1/4" hex, SS (for Series 111, 112 & 113) 1
060A05 Clamp nut, M7 x 0.75-6G thd (for Series M111, M112 & M113) 1
065A05 Seal sleeve, sensor recess mount, 0.248" OD x 0.221" ID x 0.240" thk, 17-4 SS (for Series 111A, 112A & 113A) 1
065A29 Seal, 0.250" OD x 0.218" ID x 0.015" thk, stainless steel (minimum order 5 each) 2
065A02 Seal ring, sensor flush mount, 0.248" OD x 0.219" ID x 0.015" thk, brass (for Series 111A, 112A & 113A) 3