Log In

Log In

Need an Account? Start Here

 

Model: 480E09

$350.00 USD
(Pricing valid in US only)


1-Channel, battery-powered, ICP® sensor signal conditioner, gain x1, x10, x100, 2mA, BNC input/output connectors.

  • Channels: 1

Add this product to my product comparison
Compare selected models ()

 English:SI: 
Performance
Channels1 1  
Frequency Range (-5 %) (x1, x10 Gain)0.15 to 100000 Hz0.15 to 100000 Hz[1] 
Frequency Range (-10 %) (x100 Gain)0.15 to 50000 Hz0.15 to 50000 Hz[2] 
Voltage Gain (±2 %)1:1 1:1  
Voltage Gain (±2 %)1:10 1:10  
Voltage Gain (±2 %)1:100 1:100  
Fault/Bias Monitor/Meter (±1 V) (midscale)13 VDC13 VDC 
Environmental
Temperature Range32 to 120 °F0 to 50 °C 
Electrical
Excitation Voltage (To Sensor)25 to 29 VDC25 to 29 VDC[5] 
Constant Current Excitation (To Sensor)2.0 to 3.2 mA2.0 to 3.2 mA[6] 
Discharge Time Constant>7 sec>7 sec[4][7] 
DC Offset (Maximum)<30 mV<30 mV[4] 
Spectral Noise (1 Hz) (Gain 1).25 µV/√Hz-132 dB 
Spectral Noise (10 Hz) (Gain 1).07 µV/√Hz-143 dB 
Spectral Noise (100 Hz) (Gain 1).05 µV/√Hz-146 dB 
Spectral Noise (1000 Hz) (Gain 1).04 µV/√Hz-148 dB 
Spectral Noise (10000 Hz) (Gain 1).03 µV/√Hz-150 dB 
Broadband Electrical Noise (1 to 10000 Hz) (Gain x1)3.25 µV rms-110 dB/rms 
Spectral Noise (1 Hz) (Gain 10)2.2 µV/√Hz-113 dB 
Spectral Noise (10 Hz) (Gain 10)2.0 µV/√Hz-114 dB 
Spectral Noise (100 Hz) (Gain 10)1.1 µV/√Hz-119 dB 
Spectral Noise (1000 Hz) (Gain 10).55 µV/√Hz-125 dB 
Spectral Noise (10000 Hz) (Gain 10).3 µV/√Hz-130 dB 
Broadband Electrical Noise (1 to 10000 Hz) (Gain x10)49 µV/rms-86 dB/rms 
Spectral Noise (1 Hz) (Gain 100)20 µV/√Hz-94 dB 
Spectral Noise (10 Hz) (Gain 100)19 µV/√Hz-94 dB 
Spectral Noise (100 Hz) (Gain 100)12 µV/√Hz-98 dB 
Spectral Noise (1000 Hz) (Gain 100)5.5 µV/√Hz-105 dB 
Spectral Noise (10000 Hz) (Gain 100)2 µV/√Hz-114 dB 
Broadband Electrical Noise (1 to 10000 Hz) (Gain x100)569 µV/rms-65 dB/rms 
Power Required (Standard)Internal BatteryInternal Battery 
Internal Battery (Type)9V9V 
Battery Life (Standard Alkaline)50 hours50 hours 
Power Required (Alternate)DC PowerDC Power 
DC Power15 mA15 mA[3] 
Internal Battery (Quantity)33 
DC Power18 to 30 VDC18 to 30 VDC[3][5] 
Physical
Electrical Connector (Input, sensor)BNC JackBNC Jack 
Electrical Connector (Output, scope)BNC JackBNC Jack 
Electrical Connector (External Power, DC)3.5 mm Diameter Miniature Jack3.5 mm Diameter Miniature Jack 
Electrical Connector (Battery Charger)#722 Switchcraft Jack#722 Switchcraft Jack 
Size - Depth2.4 in6.1 cm 
Size - Height4.0 in10 cm 
Size - Width2.9 in7.4 cm 
Weight (Including Batteries)0.7 lb0.3 kg 

All specifications are at room temperature unless otherwise specified.


CE

Product Notes
[1] Low frequency response specified into 1M ohm load.
[2] After Serial Number 24699, previously HFR was 100kHz.
[3] Provided by optional external DC power supply.
[4] With 1M ohm load.
[5] Excitation voltage to sensor limited by optional DC power voltage.
[6] Through internal current limiting regulator.
[7] Un-buffered output, read out device input impedance affects discharge time constant and low frequency response of unit.
[8] See PCB Declaration of Conformance PS024 for details.
Accessories:
No Accessories
Optional Versions:
No optional versions
Product Documents
Additional Downloads