Log In

Log In

Need an Account? Start Here

 

Model: 102B

$850.00 USD
(Pricing valid in US only)

Datasheet

High frequency ICP® pressure sensor, 5000 psi, 1 mV/psi, 3/8-24 mtg thd, accel. comp., ground isolated

  • Measurement Range: 5000 psi (34500 kPa)
  • Sensitivity: (±10%) 1.0 mV/psi (0.15 mV/kPa)
  • Low Frequency Response: (-5%) 0.001 Hz
  • Resonant Frequency: >=500 kHz (>=500 kHz)
  • Electrical Connector: 10-32 Coaxial Jack

Add this product to my product comparison
Compare selected models ()

 English:SI: 
Performance
Measurement Range (for ±5V output)5000 psi34500 kPa 
Useful Overrange (for ± 10V output)10000 psi69000 kPa[2] 
Sensitivity (±10 %)1.0 mV/psi0.15 mV/kPa 
Maximum Pressure (static)15000 psi103000 kPa 
Resolution20 mpsi0.14 kPa[3] 
Resonant Frequency≥500 kHz≥500 kHz 
Rise Time (Reflected)≤1.0 µ sec≤1.0 µ sec 
Low Frequency Response (-5 %)0.001 Hz0.001 Hz 
Non-Linearity≤1.0 % FS≤1.0 % FS[1] 
Environmental
Acceleration Sensitivity≤0.002 psi/g≤0.0014 kPa/(m/s²) 
Temperature Range (Operating)-100 to +275 °F-73 to +135 °C 
Temperature Coefficient of Sensitivity≤0.03 %/°F≤0.054 %/°C[3] 
Maximum Flash Temperature3000 °F1650 °C 
Maximum Shock20000 g pk196000 m/s² pk 
Electrical
Output Polarity (Positive Pressure)PositivePositive 
Discharge Time Constant (at room temp)≥500 sec≥500 sec 
Excitation Voltage20 to 30 VDC20 to 30 VDC 
Constant Current Excitation2 to 20 mA2 to 20 mA 
Output Impedance≤100 Ohm≤100 Ohm 
Output Bias Voltage8 to 14 VDC8 to 14 VDC 
Electrical Isolation100000000 Ohm100000000 Ohm 
Physical
Sensing GeometryCompressionCompression 
Sensing ElementQuartzQuartz 
Housing MaterialStainless SteelStainless Steel 
DiaphragmInvarInvar 
SealingWelded HermeticWelded Hermetic 
Electrical Connector10-32 Coaxial Jack10-32 Coaxial Jack 
Weight0.44 oz12.5 gm 

All specifications are at room temperature unless otherwise specified.


CE

Product Notes
[1] Zero-based, least-squares, straight line method.
[2] For +10 volt output, minimum 24 VDC supply voltage required. Negative 10 volt output may be limited by output bias.
[3] Typical.
[4] See PCB Declaration of Conformance PS023 for details.
Accessories:
Supplied
065A03Seal ring 0.435" OD x 0.377" ID x 0.030" thk brass(3)
Optional Versions:
(H) Hermetic Seal
 ENGLISHSI
    SealingWelded Hermetic
(M) Metric Mount
 ENGLISHSI
Accessories:
    065A40Seal ring 0.435" OD x 0.397" ID x 0.030" thk brass(1)
(S) Stainless Steel Diaphragm
 ENGLISHSI
Product Documents
Additional Downloads