Model: TLD288D01

Add to Cart for Quote

Click for lead times

ICP® impedance head, force/accel: Force: 100 mV/lb, range +/- 50 lbs; Accel: 100 mV/g, 50 g range, TEDS 1.0

  • Sensitivity: (±10%) 100 mV/g (10.2 mV/(m/s²))
  • Sensitivity: (±10%) 100 mV/lb (22.4 mV/N)
  • Frequency Range: (±5%) 1 to 5000 Hz
  • Size - Hex: 11/16 in (11/16 in)
  • Size - Height: 0.820 in (20.83 mm)
  • Weight: 0.68 oz (19.2 gm)

Add this product to my product comparison
Compare selected models ()

Sensitivity (±10 %) (Acceleration)100 mV/g10.2 mV/(m/s²) 
Sensitivity (±10 %) (Force)100 mV/lb22.4 mV/N 
Measurement Range (Acceleration)±50 g pk±490.5 m/s² pk 
Measurement Range (Force)±50 lbf pk±222.4 N pk 
Frequency Range (±5 %) (Acceleration)1 to 5000 Hz1 to 5000 Hz 
Frequency Range (±10 %) (Acceleration)0.7 to 7000 Hz0.7 to 7000 Hz 
Rise Time (Force)<10 µ sec<10 µ sec[2] 
Resonant Frequency (Mounted)≥20 kHz≥20 kHz 
Resonant Frequency (Unmounted; no load)>40 kHz>40 kHz 
Phase Response (±5 °)4 to 5000 Hz4 to 5000 Hz 
Broadband Resolution (1 to 10000 Hz)0.002 g rms0.02 m/s² rms[2] 
Broadband Resolution0.002 lb0.0089 N[2] 
Non-Linearity±1 %±1 %[1] 
Transverse Sensitivity (to Acceleration)≤5 %≤5 % 
Maximum Force500 lb2224 N 
Temperature Range (Operating)-15 to +200 °F-26 to +95 °C 
Temperature Response (on Acceleration)≤0.05 %/°F≤0.09 %/°C[2] 
Temperature Response (on Force)≤0.03 %/°F≤0.05 %/°C[2] 
Base Strain Sensitivity≤0.0007 g/µε≤0.007 (m/s²)/µε[2] 
Maximum Shock3000 g pk29430 m/s² pk 
Excitation Voltage22 to 30 VDC22 to 30 VDC 
Constant Current Excitation2 to 20 mA2 to 20 mA 
Discharge Time Constant (Acceleration)0.4 to 1.5 sec0.4 to 1.5 sec 
Discharge Time Constant (Force)≥60 sec≥60 sec 
Output Bias Voltage8 to 14 VDC8 to 14 VDC 
Output Impedance<250 Ohm<250 Ohm 
Output Polarity (Acceleration)PositivePositive 
Output Polarity (Force)PositivePositive 
Spectral Noise (1 Hz)200 µg/√Hz1962 (µm/sec2)/√Hz[2] 
Spectral Noise (10 Hz)50 µg/√Hz490.5 (µm/sec2)/√Hz[2] 
Spectral Noise (100 Hz)10 µg/√Hz98.1 (µm/sec2)/√Hz[2] 
Spectral Noise (1000 Hz)3 µg/√Hz29.4 (µm/sec2)/√Hz[2] 
Sensing Element (Acceleration)CeramicCeramic 
Sensing Element (Force)QuartzQuartz 
Sensing Geometry (Acceleration)ShearShear 
Sensing Geometry (Force)CompressionCompression 
Housing MaterialTitaniumTitanium 
SealingWelded HermeticWelded Hermetic 
Size - Hex11/16 in11/16 in 
Size - Height0.820 in20.83 mm 
Weight0.68 oz19.2 gm[2] 
Electrical Connector (Acceleration)10-32 Coaxial Jack10-32 Coaxial Jack 
Electrical Connector (Force)10-32 Coaxial Jack10-32 Coaxial Jack 
Mounting Thread (both ends)10-32 Female10-32 Female 
Mounting Torque10 to 20 in-lb1.1 to 2.2 Nm 
End Plate Mass (Force)0.16 oz4.8 gm[2] 
Stiffness2.0 lb/µin0.35 kN/µm[2] 

All specifications are at room temperature unless otherwise specified.


Product Notes
[1] Zero-based, least-squares, straight line method.
[2] Typical.
[3] See PCB Declaration of Conformance PS023 for details.
080AAdhesive Mounting Base(1)
HCS-3NIST Traceable Calibration of Series 288 impedance head(1)
081B05Mounting Stud (10-32 to 10-32)(2)
M081B05Mounting Stud 10-32 to M6 X 0.75(2)
Optional Versions:
(TLA) TEDS LMS International - Free Format
    Output Bias Voltage8 to 15 VDC
(TLB) TEDS LMS International - Automotive Format
    Output Bias Voltage8 to 15 VDC
(TLC) TEDS LMS International - Aeronautical Format
    Output Bias Voltage8 to 15 VDC
(TLD) TEDS Capable of Digital Memory and Communication Compliant with IEEE 1451.4
    Output Bias Voltage8 to 15 VDC
Product Documents
Additional Downloads None Listed