ICP® quartz force ring, 60k lb comp., 0.08 mV/lb, Metric
- Measurement Range: 60000 lb
(266.9 kN)
- Sensitivity: (±15%)0.08 mV/lb
(18.0 mV/kN)
- Low Frequency Response: 0.0003 Hz
- Upper Frequency Limit: 50000 Hz
- Temperature Range: -65 to +250 °F
(-54 to +121 °C)
RELATED PRODUCTS
|
English: |
SI: |
|
Performance |
Sensitivity (±15 %) |
0.08 mV/lb |
18.0 mV/kN |
|
Measurement Range (Compression) |
60000 lb |
266.9 kN |
|
Maximum Static Force (Compression) |
70000 lb |
311.4 kN |
|
Broadband Resolution (1) |
1 lb-rms |
4.45 N-rms |
[2]
|
Low Frequency Response |
0.0003 Hz |
0.0003 Hz |
[3]
|
Upper Frequency Limit |
50000 Hz |
50000 Hz |
[4]
|
Non-Linearity |
≤1.5 % FS |
≤1.5 % FS |
[1]
|
Environmental |
Temperature Range |
-65 to +250 °F |
-54 to +121 °C |
|
Temperature Coefficient of Sensitivity |
≤0.10 %/°F |
≤0.18 %/°C |
|
Electrical |
Discharge Time Constant (at room temp) |
≥2000 sec |
≥2000 sec |
|
Excitation Voltage |
20 to 30 VDC |
20 to 30 VDC |
|
Constant Current Excitation |
2 to 20 mA |
2 to 20 mA |
|
Output Impedance |
≤100 Ohm |
≤100 Ohm |
|
Output Bias Voltage |
8 to 14 VDC |
8 to 14 VDC |
|
Spectral Noise (1 Hz) |
0.0981 lb/√Hz |
0.44 N/√Hz |
[2]
|
Spectral Noise (10 Hz) |
0.0306 lb/√Hz |
0.14 N√Hz |
[2]
|
Spectral Noise (100 Hz) |
0.00709 lb/√Hz |
0.032 N/√Hz |
[2]
|
Spectral Noise (1000 Hz) |
0.00192 lb/√Hz |
0.00857 N/√Hz |
[2]
|
Output Polarity (Compression) |
Positive |
Positive |
|
Physical |
Preload |
12000 lb |
53.379 kN |
|
Stiffness |
40 lb/µin |
7 kN/µm |
[2]
|
Size - Diameter |
1.580 in |
40.13 mm |
|
Size - Height |
0.510 in |
12.95 mm |
|
Size - Bolt Diameter |
.75 in |
20 mm |
|
Size - ID (Hole Diameter) |
0.830 in |
21.08 mm |
|
Size - OD (Sensor) |
1.580 in |
40.13 mm |
|
Size - Sensing Surface |
1.375 in |
34.93 mm |
|
Weight |
2.7 oz |
77 gm |
|
Housing Material |
Stainless Steel |
Stainless Steel |
|
Sealing |
Hermetic |
Hermetic |
|
Electrical Connector |
10-32 Coaxial Jack |
10-32 Coaxial Jack |
|
Electrical Connection Position |
Side |
Side |
|
* All specifications are at room temperature unless otherwise specified
.

Specification Notes
[1] Zero-based, least-squares, straight line method.
[2] Typical.
[3] Calculated from discharge time constant.
[4] Estimated using rigid body dynamics calculations.
[2] Typical.
[5] See PCB Declaration of Conformance PS023 for details.
Accessories
|
|
|
Supplied |
080A82 |
Assembly lubricant (for Series 201-207 force rings) |
1 |
081A15 |
Mounting stud, 5/8-18 x 1.650", BeCu (for Models 205C & 215B) |
1 |
082B05 |
Anti-friction washer (for Models 205C & 215B) |
1 |
083B05 |
Pilot bushing (for Models 205C & 215B) |
1 |
Optional Versions
( M ) Metric Mount
Accessories: |
Supplied |
M081A15 |
Mounting Stud, M16 x 1.50 x 1.650, BeCu |
1 |
Supplied |
M083B05 |
Pilot Bushing |
1 |
( N ) Negative Output Polarity
( W ) Water Resistant Cable
Electrical Connector |
Sealed Cable |
Electrical Connection Position |
Side |