Model: 485B39

$950.00 USD
(Pricing valid in US only)

Datasheet

2-channel, USB-powered, ICP® sensor signal conditioner with USB digital output (24-bit A/D)

  • Frequency Range: (±5%) 0.8 to 20700 Hz (0.8 to 20700 Hz)
  • Internal ADC: 24-bit
  • Digital Output: USB class 1 audio
  • DC Power: (USB) <500 mW (5V at <100 mA)

Add this product to my product comparison
Compare selected models ()

 English:SI: 
Performance
Channels2 2  
Input Range (Nominal)±10 Vpk±10 Vpk[1] 
Frequency Range (±5 %)0.8 to 20700 Hz0.8 to 20700 Hz 
Low Frequency Response (-3 dB)0.5 to 1 Hz0.5 to 1 Hz[2] 
Electrical Filter Corner Frequency (Antialiasing)22.9 kHz22.9 kHz[3] 
Digital Output (Interface)USB class 1 audioUSB class 1 audio 
Environmental
Temperature Range (Operating)14 to +176 °F-10 to +80 °C 
Temperature Range (Storage)-40 to +176 °F-40 to +80 °C 
Electrical
DC Power (USB )<500 mW (5V at <100 mA) <500 mW (5V at <100 mA)  
Excitation Voltage (±5 %) (To Sensor)24 VDC24 VDC 
Constant Current Excitation (±5% )4 mA4 mA 
Discharge Time Constant1.5 sec1.5 sec 
Electrical Isolation (Case)Grounded Grounded  
Internal ADC24-bit 24-bit [4] 
Supported Sample Rates48 44.1 32 22.05 16 11.025 8 kHz48 44.1 32 22.05 16 11.025 8 kHz 
Physical
Electrical Connector (Input, sensor)2 BNC jacks 2 BNC jacks  
Electrical Connector (Output)11 in integral USB cable 28 cm integral USB cable  
Electrical Connector (Output)Type A Type A  
Size - Height0.7 in19 mm 
Size - Width1.5 in39 mm 
Size - Length2.4 in60 mm 
Weight4.4 oz125 gm 
Housing MaterialStainless SteelStainless Steel 

All specifications are at room temperature unless otherwise specified.



Product Notes
[1] ±8 V pk, guaranteed
[2] Sample rate dependent (8 kHz to 48 kHz)
[3] -3 dB, proportional to sample rate
[4] 16-bit selectable by software
Accessories:
No Accessories
Optional Versions:
No optional versions
Product Documents
Additional Downloads
- PD-4420.pdf