Triaxial, high sensitivity, ceramic shear ICP® accel., 100 mV/g, titanium hsg, 4-pin conn., high temp electronics to +325 F
- Sensitivity:
(±10%)100 mV/g
(
10.2 mV/(m/s²))
- Measurement Range:
±50 g pk
(
±490 m/s² pk)
- Electrical Connector:
1/4-28 4-Pin
|
English: |
SI: |
|
| Performance |
| Sensitivity (±10 %) |
100 mV/g |
10.2 mV/(m/s²) |
|
| Measurement Range |
±50 g pk |
±490 m/s² pk |
|
| Frequency Range (±5 %) |
2 to 5000 Hz |
2 to 5000 Hz |
|
| Frequency Range (±10 %) |
1.4 to 6500 Hz |
1.4 to 6500 Hz |
|
| Resonant Frequency |
≥25 kHz |
≥25 kHz |
|
| Broadband Resolution (1) |
0.0002 g rms |
0.002 m/s² rms |
[
2]
|
| Non-Linearity |
≤1 % |
≤1 % |
[
1]
|
| Transverse Sensitivity |
≤5 % |
≤5 % |
|
| Environmental |
| Overload Limit (Shock) |
±7000 g pk |
±68600 m/s² pk |
|
| Temperature Range (Operating) |
-65 to +250 °F |
-54 to +121 °C |
[
3]
|
| Temperature Response |
See Graph %/°F |
See Graph %/°F |
[
2]
|
| Base Strain Sensitivity |
0.001 g/µε |
0.01 (m/s²)/µε |
[
2]
|
| Electrical |
| Excitation Voltage |
20 to 30 VDC |
20 to 30 VDC |
|
| Constant Current Excitation |
2 to 20 mA |
2 to 20 mA |
|
| Output Impedance |
≤200 Ohm |
≤200 Ohm |
|
| Output Bias Voltage |
8 to 12 VDC |
8 to 12 VDC |
|
| Discharge Time Constant |
0.2 to 0.8 sec |
0.2 to 0.8 sec |
|
| Settling Time (within 10% of bias) |
<5 sec |
<5 sec |
|
| Spectral Noise (1 Hz) |
80 µg/√Hz |
785 (µm/sec2)/√Hz |
[
2]
|
| Spectral Noise (10 Hz) |
15 µg/√Hz |
147 (µm/sec2)/√Hz |
[
2]
|
| Spectral Noise (100 Hz) |
5 µg/√Hz |
49 (µm/sec2)/√Hz |
[
2]
|
| Spectral Noise (1 kHz) |
2 µg/√Hz |
20 (µm/sec2)/√Hz |
[
2]
|
| Spectral Noise (10 kHz) |
1 µg/√Hz |
9.8 (µm/sec2)/√Hz |
[
2]
|
| Physical |
| Sensing Element |
Ceramic |
Ceramic |
|
| Sensing Geometry |
Shear |
Shear |
|
| Housing Material |
Titanium |
Titanium |
|
| Sealing |
Hermetic |
Hermetic |
|
| Size - Height |
0.55 in |
14.0 mm |
|
| Size - Length |
0.80 in |
20.3 mm |
|
| Size - Width |
0.55 in |
14.0 mm |
|
| Weight |
0.37 oz |
10.5 gm |
[
2]
|
| Electrical Connector |
1/4-28 4-Pin |
1/4-28 4-Pin |
|
| Electrical Connection Position |
Side |
Side |
|
| Mounting Thread |
10-32 Female |
10-32 Female |
|
| Mounting Torque |
10 to 20 in-lb |
113 to 225 N-cm |
|
* All specifications are at room temperature unless otherwise specified
.
Specification Notes
[
1]
Zero-based, least-squares, straight line method.
[
2]
Typical.
[
3]
250° F to 325° F data valid with HT option only.
[
2]
Typical.
[
4]
TEDS option adds 1.0 VDC to bias voltage.
[
2]
Typical.
[
5]
See PCB Declaration of Conformance PS023 for details.
Accessories
|
|
|
| Supplied |
| 080A109 |
Petro Wax, one square, 1" x 1" x 0.25" |
1 |
| 080A12 |
Adhesive mtg base, 0.75" hex x 0.2" thk, 10-32 tapped hole, aluminum w/insulating hardcoat finish |
1 |
| 080A90 |
Quick bond Gel (for use with accel adhesive mtg bases to fill gaps on rough surfaces) |
1 |
| 081B05 |
Mounting stud, 10-32 to 10-32, 0.275" long, BeCu w/shoulder |
1 |
| ACS-1T |
Triaxial amplitude response calibration, from 10 Hz to upper 5% frequency, NIST traceable |
1 |
| M081B05 |
Mounting stud, 10-32 to M6x0.75-6g, 0.275" long, BeCu |
1 |
Optional Versions
(
A )
Adhesive Mount
| Accessories: |
| Supplied |
080A109 |
Petro Wax |
1 |
| Supplied |
080A90 |
Quick Bonding Gel |
1 |
(
HT )
High temperature, extends normal operation temperatures
| Frequency Range (±5 %) |
10 to 5000 Hz |
| Frequency Range (±10 %) |
7 to 6500 Hz |
| Temperature Range |
-65 to +325 °F |
-54 to +163 °C |
| Discharge Time Constant |
0.03 to 0.1 sec |
| Broadband Resolution |
0.0005 g rms |
0.005 µm/sec2 rms |
| Spectral Noise |
110 µg/√Hz |
1080 (µm/sec2)/√Hz |
| Spectral Noise |
50 µg/√Hz |
491 (µm/sec2)/√Hz |
| Spectral Noise |
30 µg/√Hz |
294 (µm/sec2)/√Hz |
| Spectral Noise |
10 µg/√Hz |
98.1 (µm/sec2)/√Hz |
| Output Bias Voltage |
7 to 16 VDC |
| Excitation Voltage |
24 to 30 VDC |
(
J )
Ground Isolated
| Electrical Isolation |
>100000000 Ohm |
| Size - Height |
0.59 in |
15.0 mm |
| Size - Length |
0.80 in |
20.3 mm |
| Size - Width |
0.55 in |
14.0 mm |
| Mounting |
Adhesive |
| Weight |
0.37 oz |
10.5 gm |
(
T )
TEDS Capable of Digital Memory and Communication Compliant with IEEE P1451.4
| Output Bias Voltage |
8.7 to 13.0 VDC |
(
TLA )
TEDS LMS International - Free Format
| Output Bias Voltage |
8.7 to 13.0 VDC |
(
TLB )
TEDS LMS International - Automotive Format
| Output Bias Voltage |
8.7 to 13.0 VDC |
(
TLC )
TEDS LMS International - Aeronautical Format
| Output Bias Voltage |
8.7 to 13.0 VDC |
(
TLD )
TEDS Capable of Digital Memory and Communication Compliant with IEEE 1451.4
| Output Bias Voltage |
8.7 to 13.0 |