Model : 352A92 | ICP® Accelerometer

Click for lead times
Lead Time for 6-10 is 10 Wks
Lead Time for 11-20 is 12 Wks
miniature, lightweight, high g icp accel, 20,000 g pk, integral 3-ft mini low noise coax cable terminating in a 10-32 jack
$ 870.00 USD
(Pricing valid in US only!)

Miniature, Lightweight, High G ICP accel, 20,000 g pk, integral 3-ft mini low noise coax cable terminating in a 10-32 jack

  • Sensitivity: (±20%)0.25 mV/g ( 0.025 mV/(m/s²))
  • Measurement Range: ±20000 g pk ( ±196200 m/s² pk)
  • Broadband Resolution: 0.04 g rms ( 0.39 m/s² rms)
  • Frequency Range: (±5%)1.2 to 10000 Hz
  • Sensing Element: Ceramic
  • Weight: 0.0055 oz ( 0.16 gm)
Additional Configurations:

RELATED PRODUCTS



002C10
002C10

General purpose coaxial cable, white FEP jacket, 10-ft, 10-32 plug to BNC plug



Add to Cart for Quote
Add to Cart
003C10
003C10

Low-noise coaxial cable, blue TFE jacket, 10-ft, 10-32 coaxial plug to BNC plug



Add to Cart for Quote
Add to Cart
039A37
039A37

Removal tool (for Model 352A91 & A92)



Add to Cart for Quote
Add to Cart
080A194
080A194

Triaxial mounting adaptor, anodized aluminum (for teardrop accelerometers)



Add to Cart for Quote
Add to Cart
480C02
480C02

Platinum Stock Products; 1-channel, battery-powered, ICP® sensor signal cond., unity gain, BNC input/output conn.



Add to Cart for Quote
Add to Cart
482C15
482C15

Platinum Stock Product; 4-channel, Line-powered, ICP® sensor signal cond., Internal jumper selectable gain x1, x10, x100



Add to Cart for Quote
Add to Cart
English: SI:
Performance
Sensitivity (±20 %) 0.25 mV/g 0.025 mV/(m/s²)
Measurement Range ±20000 g pk ±196200 m/s² pk
Frequency Range (±5 %) 1.2 to 10000 Hz 1.2 to 10000 Hz
Frequency Range (±10 %) 1 to 20000 Hz 1 to 20000 Hz
Resonant Frequency ≥100 kHz ≥100 kHz
Broadband Resolution (1) 0.04 g rms 0.39 m/s² rms [ 2]
Non-Linearity (10,000 g, 98,100 m/s²) ≤1 % ≤1 % [ 1]
Non-Linearity (20000 g, 196,200 m/s²) ≤3 % ≤3 % [ 1]
Transverse Sensitivity ≤5 % ≤5 %
Environmental
Overload Limit (Shock) ±30000 g pk ±294300 m/s² pk
Temperature Range (Operating) -65 to +325 °F -54 to +163 °C
Temperature Response See Graph %/°F See Graph %/°F [ 2]
Electrical
Excitation Voltage 18 to 30 VDC 18 to 30 VDC
Constant Current Excitation 2 to 20 mA 2 to 20 mA
Output Impedance ≤100 Ohm ≤100 Ohm
Output Bias Voltage 8 to 12 VDC 8 to 12 VDC
Discharge Time Constant 0.4 to 1.2 sec 0.4 to 1.2 sec
Settling Time (within 10% of bias) <3 sec <3 sec
Spectral Noise (1 Hz) 13.5 mg/√Hz 132 mm/s2/√Hz [ 2]
Spectral Noise (10 Hz) 3.8 mg/√Hz 37.3 mm/s2/√Hz [ 2]
Spectral Noise (100 Hz) 1.2 mg/√Hz 11.7 mm/s2/√Hz [ 2]
Spectral Noise (1 kHz) 0.36 mg/√Hz 3.53 mm/s2/√Hz [ 2]
Spectral Noise (10 kHz) 0.13 mg/√Hz 1.28 mm/s2/√Hz [ 2]
Physical
Size - Height 0.100 in 2.54 mm
Size - Length 0.215 in 5.46 mm
Size - Width 0.135 in 3.43 mm
Weight 0.0055 oz 0.16 gm [ 2] [ 3]
Sensing Element Ceramic Ceramic
Sensing Geometry Shear Shear
Housing Material Titanium Titanium
Sealing Epoxy Epoxy
Electrical Connection Position Side Side
Cable Termination 10-32 Coaxial Jack 10-32 Coaxial Jack
Cable Length 3 ft 0.9 m
Cable Type 030 Coaxial 030 Coaxial
Mounting Adhesive Adhesive
* All specifications are at room temperature unless otherwise specified
.




Specification Notes


[ 1] Zero-based, least-squares, straight line method.
[ 2] Typical.
[ 3] Weight measured without cable
[ 4] See PCB Declaration of Conformance PS023 for details.


Accessories


Supplied
039A37 Removal tool (for Model 352A91 & A92) 1
080A109 Petro Wax, one square, 1" x 1" x 0.25" 1
080A90 Quick bond Gel (for use with accel adhesive mtg bases to fill gaps on rough surfaces) 1
ACS-159 1


Product Videos