Model : 480C02 | Battery-Powered Signal Conditioner for ICP® Sensor

Click for lead times
Lead Time for 1-10 is 3 Wks
Lead Time for 11-20 is 4 Wks
$ 250.00 USD
(Pricing valid in US only!)
18 units in stock

Platinum Stock Products; 1-channel, battery-powered, ICP® sensor signal cond., unity gain, BNC input/output conn.

  • Channels: 1
English: SI:
Performance
Channels 1 1
Frequency Range (-5 %) 0.05 to 500000 Hz 0.05 to 500000 Hz [1]
Voltage Gain (±2 %) 1:1 1:1
Fault/Bias Monitor/Meter (±1 V) (midscale) 13 VDC 13 VDC
Environmental
Temperature Range 32 to 122 °F 0 to 50 °C
Electrical
Excitation Voltage (To Sensor) 25 to 29 VDC 25 to 29 VDC
Constant Current Excitation (To Sensor) 2.0 to 3.2 mA 2.0 to 3.2 mA [3]
Discharge Time Constant >7 sec >7 sec [4] [5]
DC Offset <30 mV <30 mV [4]
Spectral Noise (1 Hz) 0.25 µV/√Hz -132 dB
Spectral Noise (10 Hz) 0.07 µV/√Hz -143 dB
Spectral Noise (100 Hz) 0.05 µV/√Hz -146 dB
Spectral Noise (1000 Hz) 0.04 µV/√Hz -148 dB
Spectral Noise (10000 Hz) 0.03 µV/√Hz -150 dB
Broadband Electrical Noise (1 to 10000 Hz) 3.25 µV rms -110 dB rms
Power Required (Standard) Internal Battery Internal Battery
Internal Battery (Type) 9V 9V
Battery Life (Standard Alkaline) 100 hours 100 hours
Battery Life (Rechargeable Ni Cad) 36 hours 36 hours
Power Required (Alternate) DC Power DC Power
DC Power 5 mA 5 mA [2]
Internal Battery (Quantity) 3 3
DC Power 25 to 29 VDC 25 to 29 VDC [2]
Physical
Electrical Connector (Input, sensor) BNC Jack BNC Jack
Electrical Connector (Output, scope) BNC Jack BNC Jack
Electrical Connector (External Power, DC) 3.5 mm Diameter Miniature Jack 3.5 mm Diameter Miniature Jack
Electrical Connector (Battery Charger) #722 Switchcraft Jack #722 Switchcraft Jack
Size - Depth 4 in 10 cm
Size - Height 2.9 in 7.4 cm
Size - Width 2.2 in 5.6 cm
Weight (Including Batteries) 0.7 lb 0.3 kg
* All specifications are at room temperature unless otherwise specified
.


Specification Notes


[1] Low frequency response specified into 1M ohm load.
[2] Provided by optional external DC power supply.
[3] Through internal current limiting diode.
[4] With 1M ohm load.
[5] Un-buffered output, read out device input impedance affects discharge time constant and low frequency response of unit.
[6] See PCB Declaration of Conformance PS024 for details.