icp® quartz force ring, 80k lb comp., 0.06 mv/lb

Force Sensor, ICP®

Model 206C

Retrieving Price...

(Pricing valid only in the U.S.)

Units in Stock Lead Times
1 Lead Time for 1-3 is 10 Wks.
  • CE
  • IP

ICP® quartz force ring, 80k lb comp., 0.06 mV/lb

  • Measurement Range: 80000 lb (355.86 kN)
  • Sensitivity: (±15%)0.06 mV/lb (13.5 mV/kN)
  • Low Frequency Response: (-5%)0.0003 Hz
  • Upper Frequency Limit: 40000 Hz
  • Temperature Range: -65 to +250 °F (-54 to +121 °C)

Specification Notes


[1] Zero-based, least-squares, straight line method.
[2] Typical.
[3] Calculated from discharge time constant.
[4] Estimated using rigid body dynamics calculations.
[2] Typical.
[5] See PCB Declaration of Conformance PS023 for details.

English: SI:
Performance
Sensitivity (±15 %) 0.06 mV/lb 13.5 mV/kN
Measurement Range (Compression) 80000 lb 355.86 kN
Maximum Static Force (Compression) 90000 lb 400.34 kN
Broadband Resolution (1) 1.8 lb-rms 8.0 N-rms [2]
Low Frequency Response (-5 %) 0.0003 Hz 0.0003 Hz [3]
Upper Frequency Limit 40000 Hz 40000 Hz [4]
Non-Linearity ≤1 % FS ≤1 % FS [1]
Environmental
Temperature Range -65 to +250 °F -54 to +121 °C
Temperature Coefficient of Sensitivity ≤0.11 %/°F ≤0.198 %/°C
Electrical
Discharge Time Constant (at room temp) ≥2000 sec ≥2000 sec
Excitation Voltage 20 to 30 VDC 20 to 30 VDC
Constant Current Excitation 2 to 20 mA 2 to 20 mA
Output Impedance ≤100 Ohm ≤100 Ohm
Output Bias Voltage 8 to 14 VDC 8 to 14 VDC
Spectral Noise (1 Hz) 0.16 lb/√Hz 0.71 N/√Hz [2]
Spectral Noise (10 Hz) 0.050 lb/√Hz 0.22 N√Hz [2]
Spectral Noise (100 Hz) 0.014 lb/√Hz 0.0625 N/√Hz [2]
Spectral Noise (1000 Hz) 0.0036 lb/√Hz 0.0160 N/√Hz [2]
Output Polarity (Compression) Positive Positive
Physical
Preload 16000 lb 71.172 kN
Stiffness 74 lb/µin 13 kN/µm [2]
Size - Diameter 2.05 in 52.1 mm
Size - Height 0.590 in 15 mm
Size - Bolt Diameter 1 in 24 mm
Size - ID (Hole Diameter) 1.025 in 26 mm
Size - OD (Sensor) 2.05 in 52 mm
Size - Sensing Surface 1.750 in 44.4 mm
Weight 5.5 oz 155 gm
Housing Material Stainless Steel Stainless Steel
Sealing Hermetic Hermetic
Electrical Connector 10-32 Coaxial Jack 10-32 Coaxial Jack
Electrical Connection Position Side Side

* All specifications are at room temperature unless otherwise specified.

Accessories


Supplied
080A82 Assembly lubricant (for Series 201-207 force rings) 1
081A16 Mounting stud, 7/8-14 x 1.900", BeCu for Models 206C & 216B 1
082B06 Anti-friction washer for Models (M)206C, (M)216B, (M)260A03, (M)260A13 & (M)260A33 1
083B06 Pilot bushing for Models 206C & 216B 1

Optional Versions


(M) Metric Mount
Accessories:
Supplied M081A16 Mounting Stud, M22 x 2.00 x 1.900, BeCu 1
Supplied M083B06 Pilot Bushing 1

(W) Water Resistant Cable

English SI
Electrical Connector Sealed Cable
Electrical Connection Position Side

Build Out Your Measurement Chain


410C01
Model: 410C01

ICP® sensor signal cond., 35mm DIN-rail ...

$902.00 USD

(Pricing valid only in the U.S.)

002C10
Model: 002C10

General purpose coaxial cable, white FEP...

$57.00 USD

(Pricing valid only in the U.S.)

M206C
Model: M206C

ICP® quartz force ring, 80k lb comp., 0....

$1,700.00 USD

(Pricing valid only in the U.S.)

081A16
Model: 081A16

Mounting stud, 7/8-14 x 1.900", BeCu for...

$160.00 USD

(Pricing valid only in the U.S.)

082B06
Model: 082B06

Anti-friction washer for Models (M)206C,...

$74.00 USD

(Pricing valid only in the U.S.)

083B06
Model: 083B06

Pilot bushing for Models 206C & 216B

$51.00 USD

(Pricing valid only in the U.S.)