Model : 202B | Force Sensor, ICP®

Click for lead times
Lead Time for 1-2 is 10 Wks
Lead Time for 0-0 is 0 Wks
icp® quartz force ring, 10k lb comp., 0.5 mv/lb
$ 880.00 USD
(Pricing valid in US only!)

ICP® quartz force ring, 10k lb comp., 0.5 mV/lb

  • Measurement Range: 10000 lb ( 44.48 kN)
  • Sensitivity: (±15%)0.50 mV/lb ( 112.4 mV/kN)
  • Low Frequency Response: (-5%)0.0003 Hz
  • Upper Frequency Limit: 60000 Hz
  • Temperature Range: -65 to +250 °F ( -54 to +121 °C)

RELATED PRODUCTS



410C01
410C01

ICP® sensor signal cond., 35mm DIN-rail mount, peak track hold and waveform analog output, AC/DC coupling, gain, setup configurable via USB or Ethernet communications.



Add to Cart for Quote
Add to Cart
002C10
002C10

General purpose coaxial cable, white FEP jacket, 10-ft, 10-32 plug to BNC plug



Add to Cart for Quote
Add to Cart
M202B
M202B

ICP® quartz force ring, 10k lb comp., 0.5 mV/lb, Metric



Add to Cart for Quote
Add to Cart
081A12
081A12

Mounting stud, 5/16-24 x 0.910", BeCu for Models 202B & 212B



Add to Cart for Quote
Add to Cart
082B02
082B02

Anti-friction washer for Models (M)202B, (M)212B, (M)260A01, (M)260A11 & (M)260A31



Add to Cart for Quote
Add to Cart
083B02
083B02

Pilot bushing for Models 202B & 212B



Add to Cart for Quote
Add to Cart
English: SI:
Performance
Sensitivity (±15 %) 0.50 mV/lb 112.4 mV/kN
Measurement Range (Compression) 10000 lb 44.48 kN
Maximum Static Force (Compression) 15000 lb 66.72 kN
Broadband Resolution (1) 0.20 lb-rms 0.890 N-rms [ 2]
Low Frequency Response (-5 %) 0.0003 Hz 0.0003 Hz [ 3]
Upper Frequency Limit 60000 Hz 60000 Hz [ 4]
Non-Linearity ≤1 % FS ≤1 % FS [ 1]
Environmental
Temperature Range -65 to +250 °F -54 to +121 °C
Temperature Coefficient of Sensitivity ≤0.03 %/°F ≤0.054 %/°C
Electrical
Discharge Time Constant (at room temp) ≥2000 sec ≥2000 sec
Excitation Voltage 20 to 30 VDC 20 to 30 VDC
Constant Current Excitation 2 to 20 mA 2 to 20 mA
Output Impedance ≤100 Ohm ≤100 Ohm
Output Bias Voltage 8 to 14 VDC 8 to 14 VDC
Output Polarity (Compression) Positive Positive
Physical
Preload 2000 lb 8.896 kN
Stiffness 16 lb/µin 2.8 kN/µm [ 2]
Size - Diameter 0.870 in 22.1 mm
Size - Height 0.390 in 9.91 mm
Size - Bolt Diameter 0.375 in 10 mm
Size - ID (Hole Diameter) 0.413 in 10.49 mm
Size - OD (Sensor) 0.870 in 22.10 mm
Size - Sensing Surface 0.665 in 16.89 mm
Weight 0.67 oz 19 gm
Housing Material Stainless Steel Stainless Steel
Sealing Hermetic Hermetic
Electrical Connector 10-32 Coaxial Jack 10-32 Coaxial Jack
Electrical Connection Position Side Side
* All specifications are at room temperature unless otherwise specified
.




Specification Notes


[ 1] Zero-based, least-squares, straight line method.
[ 2] Typical.
[ 3] Calculated from discharge time constant.
[ 4] Estimated using rigid body dynamics calculations.
[ 2] Typical.
[ 5] See PCB Declaration of Conformance PS023 for details.


Accessories


Supplied
080A82 Assembly lubricant (for Series 201-207 force rings) 1
081A12 Mounting stud, 5/16-24 x 0.910", BeCu for Models 202B & 212B 1
082B02 Anti-friction washer for Models (M)202B, (M)212B, (M)260A01, (M)260A11 & (M)260A31 1
083B02 Pilot bushing for Models 202B & 212B 1


Optional Versions


( M ) Metric Mount
Accessories:
Supplied M083B02 Pilot Bushing 1
Supplied M081A12 Mounting Stud, M8 x 1.00, BeCu 1


( N ) Negative Output Polarity


( W ) Water Resistant Cable
English SI
Electrical Connector Sealed Cable
Electrical Connection Position Side