Model : 054230-01404 | LOAD WASHER LOAD CELL - M30 FASTENER

Click for lead times
pcb l&t fastener force washer, metric, m30, 400 kn 89.9 klbf), 5-ft  integral cable w/pigtails
Add to Cart for Quote

PCB L&T Fastener Force Washer, Metric, M30, 400 kN 89.9 klbf), 5-ft Integral Cable w/pigtails

For more information on RS Technologies Fastener Testing products and applications, please visit:
https://www.pcb.com/sensors-for-test-measurement/fastener-technology/fastener-testing

To view the RS Technologies Fastener Testing Product Catalog, please visit:
https://www.pcb.com/Contentstore/MktgContent/LinkedDocuments/Force-Torque/RS_Fast_Testing_Lowres.pdf

  • Measurement Range: 89923 lb ( 400 kN)
  • Sensitivity: 1.50 mV/V
  • Size - Diameter: 2.38 in ( 60.45 mm)
  • Size - Height: 0.875 in ( 22.23 mm)

RELATED PRODUCTS



080920-01000
080920-01000

Model 920 Portable Digital Peak Meter for torque, torque-angle or load measurement; Click-Wrench calc feature, w/battery charger, instruction manual & shoulder strap



Add to Cart for Quote
Add to Quote
080962-01000
080962-01000

Model 962 Portable Transient Recorder, complete with FastPlot2 data transfer software, 8GB USB Memory Drive, USB cable for data upload/download, battery charger, and carrying case



Add to Cart for Quote
Add to Quote
English: SI:
Performance
Measurement Range (Full Scale Capacity) 89923 lb 400 kN [ 1]
Sensitivity (output at rated capacity) 1.50 mV/V 1.50 mV/V [ 1] [ 2]
Non-Linearity ±5 % FS ±5 % FS [ 2]
Hysteresis ±5 % FS ±5 % FS [ 2]
Non-Repeatability ±2 % FS ±2 % FS [ 2]
Resonant Frequency 10 kHz 10 kHz
Environmental
Overload Limit 134885 lb 600 kN
Temperature Range (Operating) 0 to +200 °F -18 to +93 °C
Temperature Range (Compensated) +70 to +170 °F +21 to +77 °C
Temperature Effect on Output (Maximum) ±0.002 %Reading/°F ±0.0018 %Reading/°C [ 3]
Temperature Effect on Zero Balance (Maximum) ±0.002 %FS/°F ±0.0018 %FS/°C [ 2]
Electrical
Bridge Resistance 350 Ohm 350 Ohm [ 1]
Excitation Voltage (Recommended) 10 VDC 10 VDC [ 4]
Zero Balance ≤1 % FS ≤1 % FS
Output Polarity (Compression) Positive Positive
Physical
Size - Height 0.875 in 22.23 mm [ 5]
Size - Diameter 2.38 in 60.45 mm
Fastener Size NO EQUIV 30 mm
Through Hole Diameter 1.189 in 30.2 mm
Sensing Element Strain Gage Strain Gage
Electrical Connector Pigtail Ends Pigtail Ends
Electrical Connection Position Side Side
* All specifications are at room temperature unless otherwise specified
.




Specification Notes


[ 1] Nominal.
[ 2] FS - Full Scale.
[ 3] Over compensated operating temperature range.
[ 1] Nominal.
[ 4] Calibrated at 10 VDC, usable 5 to 20 VDC or VAC RMS.
[ 5] See Outline Drawing (LT30776) for Complete Dimensions


Accessories


Supplied
7122R-007502 1
92160-035616 1
92160-035617 1