Model: 054210-01543

Add to Cart for Quote

PCB L&T Fastener Force Washer, Metric, M10, 54 kN (12.1 klbf), 5-ft Integral Cable w/pigtails

  • Measurement Range: 12139.68 lb (54 kN)
  • Sensitivity: 1.50 mV/V
  • Size - Diameter: 0.943 in (23.95 mm)
  • Size - Height: 0.420 in (10.69 mm)

Add this product to my product comparison
Compare selected models ()

 English:SI: 
Performance
Measurement Range (Full Scale Capacity)12139.68 lb54 kN[1] 
Sensitivity (output at rated capacity)1.50 mV/V1.50 mV/V[1][2] 
Non-Linearity±5 % FS±5 % FS[2] 
Hysteresis±5 % FS±5 % FS[2] 
Non-Repeatability±2 % FS±2 % FS[2] 
Resonant Frequency10 kHz10 kHz 
Environmental
Overload Limit18210 lb81 kN 
Temperature Range (Operating)0 to +200 °F-18 to +93 °C 
Temperature Range (Compensated)+70 to +170 °F+21 to +77 °C 
Temperature Effect on Output (Maximum)±0.002 %Reading/°F±0.0018 %Reading/°C[3] 
Temperature Effect on Zero Balance (Maximum)±0.002 %FS/°F±0.0018 %FS/°C[2] 
Electrical
Bridge Resistance350 Ohm350 Ohm[1] 
Excitation Voltage (Recommended)10 VDC10 VDC[4] 
Zero Balance≤1 % FS≤1 % FS 
Output Polarity (Compression)PositivePositive 
Physical
Size - Height0.420 in10.69 mm[5] 
Size - Diameter0.943 in23.95 mm 
Fastener SizeNO EQUIV 10 mm 
Through Hole Diameter.401 in10.19 mm 
Sensing ElementStrain GageStrain Gage 
Electrical ConnectorPigtail Ends Pigtail Ends  
Electrical Connection PositionSideSide 

All specifications are at room temperature unless otherwise specified.



Product Notes
[1] Nominal.
[2] FS - Full Scale.
[3] Over compensated operating temperature range.
[4] Calibrated at 10 VDC, usable 5 to 20 VDC or VAC RMS.
[5] See Outline Drawing (LT30776) for Complete Dimensions
Accessories:
Supplied
7122R-0075028G16B 75K .025% GENER RES 3PPM(1)
92160-032345M10 Hardened Washer - Top(1)
92160-032346M10 Hardened Washer - Bottom(1)
Optional Versions:
No optional versions
Product Documents
Additional Downloads None Listed