Model: M212B

$775.00 USD
(Pricing valid in US only)


Charge quartz force ring, 10k lb comp., 18 pC/lb, charge output, Metric

  • Sensitivity: (±15%) 18 pC/lb (4047 pC/kN)
  • Upper Frequency Limit: 60000 Hz
  • Temperature Range: -100 to +400 °F (-73 to +204 °C)
  • Weight: 0.67 oz (19 gm)

Add this product to my product comparison
Compare selected models ()

Sensitivity (±15 %)18 pC/lb4047 pC/kN 
Measurement Range (Compression)10000 lb44.48 kN 
Maximum Static Force (Compression)15000 lb66.72 kN 
Upper Frequency Limit60000 Hz60000 Hz[2][3] 
Non-Linearity≤1 % FS≤1 % FS[1] 
Temperature Range-100 to +400 °F-73 to +204 °C 
Temperature Coefficient of Sensitivity≤0.01 %/°F≤0.018 %/°C 
Capacitance19 pF19 pF[4] 
Insulation Resistance≥1E12 ≥1E12  
Preload2000 lb8.896 kN 
Stiffness16 lb/µin2.8 kN/µm[4] 
Size - Diameter0.870 in22.1 mm 
Size - Height0.390 in9.91 mm 
Size - Bolt Diameter3/8 in10 mm 
Size - ID (Hole Diameter)0.413 in10.49 mm 
Size - OD (Sensor)0.870 in22.1 mm 
Size - Sensing Surface0.665 in16.89 mm 
Weight0.67 oz19 gm 
Housing MaterialStainless SteelStainless Steel 
Electrical Connector10-32 Coaxial Jack10-32 Coaxial Jack 
Electrical Connection PositionSideSide 

All specifications are at room temperature unless otherwise specified.

Product Notes
[1] Zero-based, least-squares, straight line method.
[2] Estimated using rigid body dynamics calculations.
[3] Low frequency response and system noise dependent on choice of external signal conditioning electronics.
[4] Typical.
080A82Assembly Lubricant(1)
081A12Mounting Stud, 5/16-24 x 0.910, BeCu(1)
082B02Anti-Friction Washer(1)
083B02Pilot bushing (for Models 202B and 212B)(1)
Optional Versions:
(M) Metric Mount
    080A82Accessory for Force - Torque Division Product(1)
    082B02Anti-Friction Washer(1)
    M083B02Pilot Bushing(1)
    M081A12Mounting Stud, M8 x 1.00, BeCu(1)
(P) Positive Output Polarity
(W) Water Resistant Cable
    Electrical ConnectorMolded Integral Cable
    Electrical Connection PositionSide
Product Documents
Additional Downloads