charge quartz force ring, 10k lb comp., 18 pc/lb, charge output, metric

Force Sensor, Charge Output

Model M212B

Retrieving Price...

(Pricing valid only in the U.S.)

Units in Stock Lead Times
6 Call for Lead Time
  • IP

Charge quartz force ring, 10k lb comp., 18 pC/lb, charge output, Metric

  • Sensitivity: (±15%)18 pC/lb (4047 pC/kN)
  • Upper Frequency Limit: 60000 Hz
  • Temperature Range: -100 to +400 °F (-73 to +204 °C)
  • Weight: 0.67 oz (19 gm)

Specification Notes


[1] Zero-based, least-squares, straight line method.
[2] Estimated using rigid body dynamics calculations.
[3] Low frequency response and system noise dependent on choice of external signal conditioning electronics.
[4] Typical.

English: SI:
Performance
Sensitivity (±15 %) 18 pC/lb 4047 pC/kN
Measurement Range (Compression) 10000 lb 44.48 kN
Maximum Static Force (Compression) 15000 lb 66.72 kN
Upper Frequency Limit 60000 Hz 60000 Hz [2] [3]
Non-Linearity ≤1 % FS ≤1 % FS [1]
Environmental
Temperature Range -100 to +400 °F -73 to +204 °C
Temperature Coefficient of Sensitivity ≤0.01 %/°F ≤0.018 %/°C
Electrical
Capacitance 19 pF 19 pF [4]
Insulation Resistance ≥1E12 ≥1E12
Output Polarity (Compression) Negative Negative
Physical
Preload 2000 lb 8.896 kN
Stiffness 16 lb/µin 2.8 kN/µm [4]
Size - Diameter 0.870 in 22.1 mm
Size - Height 0.390 in 9.91 mm
Size - Bolt Diameter 3/8 in 10 mm
Size - ID (Hole Diameter) 0.413 in 10.49 mm
Size - OD (Sensor) 0.870 in 22.1 mm
Size - Sensing Surface 0.665 in 16.89 mm
Weight 0.67 oz 19 gm
Housing Material Stainless Steel Stainless Steel
Sealing Hermetic Hermetic
Electrical Connector 10-32 Coaxial Jack 10-32 Coaxial Jack
Electrical Connection Position Side Side

* All specifications are at room temperature unless otherwise specified.

Accessories


Supplied
080A82 Assembly lubricant (for Series 201-207 force rings) 0
081A12 Mounting stud, 5/16-24 x 0.910", BeCu for Models 202B & 212B 0
082B02 Anti-friction washer for Models (M)202B, (M)212B, (M)260A01, (M)260A11 & (M)260A31 0
083B02 Pilot bushing for Models 202B & 212B 0

Optional Versions


(M) Metric Mount
Accessories:
Supplied 080A82 Accessory for Force - Torque Division Product 0
Supplied 080A82 Accessory for Force - Torque Division Product 0
Supplied M081A12 Mounting Stud, M8 x 1.00, BeCu 0
Supplied M081A12 Mounting Stud, M8 x 1.00, BeCu 0
Supplied M083B02 Pilot Bushing 0
Supplied M083B02 Pilot Bushing 0
Supplied 082B02 Anti-Friction Washer 0
Supplied 082B02 Anti-Friction Washer 0

(P) Positive Output Polarity

English SI
Output Polarity Positive

(W) Water Resistant Cable

English SI
Electrical Connector Molded Integral Cable Molded Integral Cable
Electrical Connection Position Side

Build Out Your Measurement Chain


212B
Model: 212B

Charge quartz force ring, 10k lb comp., ...

$955.00 USD

(Pricing valid only in the U.S.)

M081A12
Model: M081A12

Mounting stud, M8x1.00 x 0.910", BeCu fo...

$42.00 USD

(Pricing valid only in the U.S.)

M083B02
Model: M083B02

Pilot bushing for Models M202B & M212B

$18.00 USD

(Pricing valid only in the U.S.)

082B02
Model: 082B02

Anti-friction washer for Models (M)202B,...

$28.00 USD

(Pricing valid only in the U.S.)