Model: 626B02

$425.00 USD
(Pricing valid in US only)

Low freq., industrial, ceramic shear ICP® accel, 500 mV/g, 0.2 to 6k Hz, top exit, 2-pin conn., frequency sweep ISO 17025 accredited calibration

  • Sensitivity: (±5%) 500 mV/g (51 mV/(m/s²))
  • Frequency Range: (±3dB) 12 to 360000 cpm (0.2 to 6000 Hz)
  • Sensing Element: Ceramic
  • Measurement Range: ±10 g (±98 m/s²)
  • Weight: 7.0 oz (199 gm)

Add this product to my product comparison
Compare selected models ()

Sensitivity (±5 %)500 mV/g51 mV/(m/s²)[1] 
Measurement Range±10 g±98 m/s² 
Frequency Range (±5 %)30 to 120000 cpm0.5 to 2000 Hz[3] 
Frequency Range (±10 %)22 to 240000 cpm0.37 to 4000 Hz 
Frequency Range (±3 dB)12 to 360000 cpm0.2 to 6000 Hz 
Resonant Frequency720 kcpm12 kHz[4] 
Broadband Resolution (1 to 10000 Hz)20 µg196 µm/sec2[4] 
Non-Linearity±1 %±1 %[2] 
Transverse Sensitivity≤7 %≤7 % 
Overload Limit (Shock)2500 g pk24525 m/s² pk 
Temperature Range-65 to +250 °F-54 to +121 °C 
Temperature ResponseSee Graph %/°FSee Graph %/°F[4] 
Enclosure RatingIP68IP68 
Settling Time (within 1% of bias)≤3.0 sec≤3.0 sec 
Discharge Time Constant≥1.0 sec≥1.0 sec 
Excitation Voltage18 to 28 VDC18 to 28 VDC 
Constant Current Excitation2 to 20 mA2 to 20 mA 
Output Impedance<100 Ohm<100 Ohm 
Output Bias Voltage8 to 12 VDC8 to 12 VDC 
Spectral Noise (10 Hz)0.9 µg/√Hz8.8 (µm/sec2)/√Hz[4] 
Spectral Noise (100 Hz)0.7 µg/√Hz7.0 (µm/sec2)/√Hz[4] 
Spectral Noise (1 kHz)0.3 µg/√Hz3.1 (µm/sec2)/√Hz[4] 
Electrical Isolation (Case)>100000000 Ohm>100000000 Ohm 
Size - Hex1 3/16 in30.2 mm 
Size - Height2 3/16 in55.6 mm 
Weight7.0 oz199 gm 
Mounting Thread1/4-28 UNFNot Applicable[5] 
Mounting Torque2 to 5 ft-lb2.7 to 6.8 Nm 
Sensing ElementCeramicCeramic 
Sensing GeometryShearShear 
Housing MaterialStainless SteelStainless Steel 
SealingWelded HermeticWelded Hermetic 
Electrical Connector2-Pin MIL-C-50152-Pin MIL-C-5015 
Electrical Connection PositionTopTop 

All specifications are at room temperature unless otherwise specified.


Product Notes
[1] Conversion Factor 1g = 9.81 m/s².
[2] Zero-based, least-squares, straight line method.
[3] The high frequency tolerance is accurate within ±10% of the specified frequency.
[4] Typical.
[5] 1/4-28 has no equivalent in S.I. units.
[6] See PCB Declaration of Conformance PS023 for details.
081A40Mounting Stud(1)
085A31Protective Thermal Jacket(1)
ICS-1NIST-traceable single-axis amplitude response calibration from 600 cpm (10 Hz) to upper 5% frequency(1)
Optional Versions:
(M) Metric Mount
    M081A61Mounting Stud(1)
Product Documents
Additional Downloads None Listed