Model : 480E09 | Signal Conditioner, Battery-Powered

Click for lead times
Lead Time for 1-5 is 2 Wks
Lead Time for 6-10 is 3 Wks
$ 365.00 USD
(Pricing valid in US only!)

1-Channel, battery-powered, ICP® sensor signal conditioner, gain x1, x10, x100, 2mA, BNC input/output connectors.

  • Channels: 1
English: SI:
Performance
Channels 1 1
Frequency Range (-5 %) (x1, x10 Gain) 0.15 to 100000 Hz 0.15 to 100000 Hz [1]
Frequency Range (-10 %) (x100 Gain) 0.15 to 50000 Hz 0.15 to 50000 Hz [2]
Voltage Gain (±2 %) 1:1 1:1
Voltage Gain (±2 %) 1:10 1:10
Voltage Gain (±2 %) 1:100 1:100
Fault/Bias Monitor/Meter (±1 V) (midscale) 13 VDC 13 VDC
Environmental
Temperature Range 32 to 120 °F 0 to 50 °C
Electrical
Excitation Voltage (To Sensor) 25 to 29 VDC 25 to 29 VDC [5]
Constant Current Excitation (To Sensor) 2.0 to 3.2 mA 2.0 to 3.2 mA [6]
Discharge Time Constant >7 sec >7 sec [4] [7]
DC Offset (Maximum) <30 mV <30 mV [4]
Spectral Noise (1 Hz) (Gain 1) .25 µV/√Hz -132 dB
Spectral Noise (10 Hz) (Gain 1) .07 µV/√Hz -143 dB
Spectral Noise (100 Hz) (Gain 1) .05 µV/√Hz -146 dB
Spectral Noise (1000 Hz) (Gain 1) .04 µV/√Hz -148 dB
Spectral Noise (10000 Hz) (Gain 1) .03 µV/√Hz -150 dB
Broadband Electrical Noise (1 to 10000 Hz) (Gain x1) 3.25 µV rms -110 dB/rms
Spectral Noise (1 Hz) (Gain 10) 2.2 µV/√Hz -113 dB
Spectral Noise (10 Hz) (Gain 10) 2.0 µV/√Hz -114 dB
Spectral Noise (100 Hz) (Gain 10) 1.1 µV/√Hz -119 dB
Spectral Noise (1000 Hz) (Gain 10) .55 µV/√Hz -125 dB
Spectral Noise (10000 Hz) (Gain 10) .3 µV/√Hz -130 dB
Broadband Electrical Noise (1 to 10000 Hz) (Gain x10) 49 µV/rms -86 dB/rms
Spectral Noise (1 Hz) (Gain 100) 20 µV/√Hz -94 dB
Spectral Noise (10 Hz) (Gain 100) 19 µV/√Hz -94 dB
Spectral Noise (100 Hz) (Gain 100) 12 µV/√Hz -98 dB
Spectral Noise (1000 Hz) (Gain 100) 5.5 µV/√Hz -105 dB
Spectral Noise (10000 Hz) (Gain 100) 2 µV/√Hz -114 dB
Broadband Electrical Noise (1 to 10000 Hz) (Gain x100) 569 µV/rms -65 dB/rms
Power Required (Standard) Internal Battery Internal Battery
Internal Battery (Type) 9V 9V
Battery Life (Standard Alkaline) 50 hours 50 hours
Power Required (Alternate) DC Power DC Power
DC Power 15 mA 15 mA [3]
Internal Battery (Quantity) 3 3
DC Power 18 to 30 VDC 18 to 30 VDC [3] [5]
Physical
Electrical Connector (Input, sensor) BNC Jack BNC Jack
Electrical Connector (Output, scope) BNC Jack BNC Jack
Electrical Connector (External Power, DC) 3.5 mm Diameter Miniature Jack 3.5 mm Diameter Miniature Jack
Electrical Connector (Battery Charger) #722 Switchcraft Jack #722 Switchcraft Jack
Size - Depth 2.4 in 6.1 cm
Size - Height 4.0 in 10 cm
Size - Width 2.9 in 7.4 cm
Weight (Including Batteries) 0.7 lb 0.3 kg
* All specifications are at room temperature unless otherwise specified
.


Specification Notes


[1] Low frequency response specified into 1M ohm load.
[2] After Serial Number 24699, previously HFR was 100kHz.
[3] Provided by optional external DC power supply.
[4] With 1M ohm load.
[5] Excitation voltage to sensor limited by optional DC power voltage.
[6] Through internal current limiting regulator.
[7] Un-buffered output, read out device input impedance affects discharge time constant and low frequency response of unit.
[8] See PCB Declaration of Conformance PS024 for details.