platinum stock products; triaxial, high sensitivity, ceramic shear icp® accel., 1000 mv/g, 0.5 to 3k hz, 4-pin conn.

Triaxial ICP® Accelerometer

Model 356B18

$1,207.00 USD

(Pricing valid only in the U.S.)

Units in Stock Lead Times
More on the way Lead Time for 1-10 is 10 Wks
Lead Time for 11-20 is 12 Wks

Platinum Stock Products; Triaxial, high sensitivity, ceramic shear ICP® accel., 1000 mV/g, 0.5 to 3k Hz, 4-pin conn.

  • Sensitivity: (±10%)1000 mV/g (102 mV/(m/s²))
  • Measurement Range: ±5 g pk (±49 m/s² pk)
  • Electrical Connector: 1/4-28 4-Pin

Specification Notes


[1] Zero-based, least-squares, straight line method.
[2] Typical.
[3] See PCB Declaration of Conformance PS023 for details.

English: SI:
Performance
Sensitivity (±10 %) 1000 mV/g 102 mV/(m/s²)
Measurement Range ±5 g pk ±49 m/s² pk
Frequency Range (±5 %) 0.5 to 3000 Hz 0.5 to 3000 Hz
Frequency Range (±10 %) 0.3 to 5000 Hz 0.3 to 5000 Hz
Resonant Frequency ≥20 kHz ≥20 kHz
Broadband Resolution (1) 0.00005 g rms 0.0005 m/s² rms [2]
Phase Response (±5 °) (at 70°F [21°C]) 2 to 2000 Hz 2 to 2000 Hz
Non-Linearity ≤1 % ≤1 % [1]
Transverse Sensitivity ≤5 % ≤5 %
Environmental
Overload Limit (Shock) ±5000 g pk ±5000 g pk
Temperature Range (Operating) -20 to +170 °F -29 to +77 °C
Temperature Response See Graph %/°F See Graph %/°F
Base Strain Sensitivity 0.0007 g/µε 0.007 (m/s²)/µε [2]
Electrical
Excitation Voltage 20 to 30 VDC 20 to 30 VDC
Constant Current Excitation 2 to 20 mA 2 to 20 mA
Output Impedance ≤600 Ohm ≤600 Ohm
Output Bias Voltage 8 to 12 VDC 8 to 12 VDC
Discharge Time Constant 0.8 to 3.0 sec 0.8 to 3.0 sec
Settling Time (within 10% of bias) <12 sec <12 sec
Spectral Noise (1 Hz) 11.4 µg/√Hz 112 (µm/sec2)/√Hz [2]
Spectral Noise (10 Hz) 4.0 µg/√Hz 39 (µm/sec2)/√Hz [2]
Spectral Noise (100 Hz) 1.2 µg/√Hz 12 (µm/sec2)/√Hz [2]
Spectral Noise (1 kHz) 0.4 µg/√Hz 4.4 (µm/sec2)/√Hz [2]
Physical
Sensing Element Ceramic Ceramic
Sensing Geometry Shear Shear
Housing Material Anodized Aluminum Anodized Aluminum
Sealing Epoxy Epoxy
Size - Height 0.80 in 20.3 mm
Size - Length 1.03 in 26.1 mm
Size - Width 0.80 in 20.3 mm
Weight 0.88 oz 25 gm [2]
Electrical Connector 1/4-28 4-Pin 1/4-28 4-Pin
Electrical Connection Position Side Side
Mounting Thread 10-32 Female 10-32 Female

* All specifications are at room temperature unless otherwise specified.

Accessories


Supplied
080A68 Adhesive mtg base, 0.875" hex x 0.2" thk, 10-32 tapped hole, aluminum w/ isolation hardcoat finish (for Models 356B07 & 356B08) 1
081B05 Mounting stud, 10-32 to 10-32, 0.275" long, BeCu w/shoulder 1
ACS-1T Triaxial amplitude response calibration, from 10 Hz to upper 5% frequency, NIST traceable 1
M081B05 Mounting stud, 10-32 to M6x0.75-6g, 0.275" long, BeCu 1

Optional Versions


(A) Adhesive Mount

English SI
Mounting Thread None - Adhesive Mount Only

(J) Ground Isolated

English SI
Electrical Isolation >100000000 Ohm
Size - Height 0.85 in 21.6 mm
Size - Length 1.03 in 26.1 mm
Size - Width 0.85 in 21.6 mm

(T) TEDS Capable of Digital Memory and Communication Compliant with IEEE P1451.4

English SI
Output Bias Voltage 8.5 to 13 VDC

(TLA) TEDS LMS International - Free Format

English SI
Output Bias Voltage 8.5 to 13 VDC

(TLB) TEDS LMS International - Automotive Format

English SI
Output Bias Voltage 8.5 to 13 VDC

(TLC) TEDS LMS International - Aeronautical Format

English SI
Output Bias Voltage 8.5 to 13 VDC

(TLD) TEDS Capable of Digital Memory and Communication Compliant with IEEE 1451.4

English SI
Output Bias Voltage 8.5 to 13

Build Out Your Measurement Chain


Model: 034G10

4-conductor, low noise, shielded FEP cab...

$190.00 USD

(Pricing valid only in the U.S.)

Model: 034W10

4-conductor, twisted bundle, low noise, ...

$263.50 USD

(Pricing valid only in the U.S.)

Model: 078G10

4-conductor, twisted bundle, low noise, ...

$184.50 USD

(Pricing valid only in the U.S.)

Model: 036G10

4-conductor, silicone jacket cable, 10-f...

$200.00 USD

(Pricing valid only in the U.S.)