Model : RHM240M40 | Uniaxial ICP® Strain Sensor w/ Integral Cable

Click for lead times
$ 825.00 USD
(Pricing valid in US only!)

Industrial dynamic strain sensor, ground isolated, ICP® quartz, 10 mV/microstrain, +/-300 microstrain range, M6 x 1 thd, RoHS compliant, integral cable.

  • Measurement Range: 300 pk µε (300 pk µε)
  • Sensitivity: (±20%)10 mV/µε (10 mV/µε)
  • Broadband Resolution: .001 nε (.001 nε)

RELATED PRODUCTS



RHM240A01

Industrial dynamic strain sensor, ICP® quartz, 100 mV/microstrain, +/-50 microstrain range, M6 x 1 thd, RoHS compliant



Add to Cart for Quote
Add To Quote
RHM240A02

Industrial dynamic strain sensor, ICP® quartz, 50 mV/microstrain, +/-100 microstrain range, M6 x 1 thd, RoHS compliant



Add to Cart for Quote
Add To Cart
RHM240A03

Industrial dynamic strain sensor, ICP® quartz, 10 mV/microstrain, +/300 microstrain range, M6 x 1 thd, RoHS compliant



Add to Cart for Quote
Add To Quote
410C01

ICP® sensor signal cond., 35mm DIN-rail mount, peak track hold and waveform analog output, AC/DC coupling, gain, setup configurable via USB or Ethernet communications.



Add to Cart for Quote
Add To Cart
English: SI:
Performance
Sensitivity (±20 %) 10 mV/µε 10 mV/µε
Measurement Range 300 pk µε 300 pk µε [4]
Frequency Range (-5 %) .004 Hz .004 Hz [3]
Broadband Resolution (1) .001 nε .001 nε [2]
Non-Linearity ≤2 % ≤2 % [1]
Environmental
Temperature Range (Operating ) -65 to +250 °F -54 to +121 °C [2]
Electrical
Excitation Voltage 20 to 30 VDC 20 to 30 VDC
Constant Current Excitation 2 to 20 mA 2 to 20 mA
Output Bias Voltage 8 to 14 VDC 8 to 14 VDC
Discharge Time Constant ≥150 sec ≥150 sec
Electrical Isolation ≥100000000 Ohm ≥100000000 Ohm
Physical
Sensing Element Quartz Quartz
Housing Material Stainless Steel Stainless Steel
Sealing Epoxy Epoxy
Size - Width .67 in 17 mm
Size - Length 1.725 in 43.8 mm
Size - Height .60 in 15 mm
Weight (without cable) 2.0 oz 58 gm [2]
Electrical Connector Integral Cable Integral Cable
Electrical Connection Position Side Side
Mounting Through Hole Through Hole
Mounting Torque 7.38 ft-lb 10 Nm
* All specifications are at room temperature unless otherwise specified
.


Specification Notes


[1] Zero-based, least-squares, straight line method.
[2] Typical.
[3] Calculated from discharge time constant.
[4] Based on 5 mV/µɛ sensitivity.
[2] Typical.
[5] See PCB Declaration of Conformance PS023 for details.


Accessories


Supplied
M081A100 Mounting screw 1