Products

icp® quartz force ring, 20k lb comp., 0.25 mv/lb, metric

Force Sensor, ICP®

Model M203B

Retrieving Price...

(Pricing valid only in the U.S.)

Units in Stock Lead Times
More on the way Call for Lead Time
  • CE
  • IP

ICP® quartz force ring, 20k lb comp., 0.25 mV/lb, Metric

  • Measurement Range: 20000 lb (88.96 kN)
  • Sensitivity: (±15%)0.25 mV/lb (56.2 mV/kN)
  • Low Frequency Response: (-5%)0.0003 Hz
  • Upper Frequency Limit: 60000 Hz
  • Temperature Range: -65 to +250 °F (-54 to +121 °C)

Specification Notes


[1] Zero-based, least-squares, straight line method.
[2] Typical.
[3] Calculated from discharge time constant.
[4] Estimated using rigid body dynamics calculations.
[2] Typical.
[5] See PCB Declaration of Conformance PS023 for details.

English: SI:
Performance
Sensitivity (±15 %) 0.25 mV/lb 56.2 mV/kN
Measurement Range (Compression) 20000 lb 88.96 kN
Maximum Static Force (Compression) 25000 lb 111.2 kN
Broadband Resolution (1) 0.4 lb-rms 1.78 N-rms [2]
Low Frequency Response (-5 %) 0.0003 Hz 0.0003 Hz [3]
Upper Frequency Limit 60000 Hz 60000 Hz [4]
Non-Linearity ≤1 % FS ≤1 % FS [1]
Environmental
Temperature Range -65 to +250 °F -54 to +121 °C
Temperature Coefficient of Sensitivity ≤0.11 %/°F ≤0.198 %/°C
Electrical
Discharge Time Constant (at room temp) ≥2000 sec ≥2000 sec
Excitation Voltage 20 to 30 VDC 20 to 30 VDC
Constant Current Excitation 2 to 20 mA 2 to 20 mA
Output Impedance ≤100 Ohm ≤100 Ohm
Output Bias Voltage 8 to 14 VDC 8 to 14 VDC
Output Polarity (Compression) Positive Positive
Physical
Preload 4000 lb 17.793 kN
Stiffness 23 lb/µin 4 kN/µm [2]
Size - Diameter 1.10 in 27.9 mm
Size - Height 0.430 in 10.9 mm
Size - Bolt Diameter .5 in 12 mm
Size - ID (Hole Diameter) 0.520 in 13.2 mm
Size - OD (Sensor) 1.10 in 27.9 mm
Size - Sensing Surface 0.888 in 22.6 mm
Weight 1.3 oz 38 gm
Housing Material Stainless Steel Stainless Steel
Sealing Hermetic Hermetic
Electrical Connector 10-32 Coaxial Jack 10-32 Coaxial Jack
Electrical Connection Position Side Side

* All specifications are at room temperature unless otherwise specified.

Accessories


Supplied
080A82 Assembly lubricant (for Series 201-207 force rings) 1
081A13 Mounting stud, 3/8-24 x 1.100", BeCu for Models 203B & 213B 1
082B03 Anti-friction washer for Models (M)203B & (M)213B 1
083B03 Pilot bushing (for Models 203B & 213B) 1

Optional Versions


(M) Metric Mount
Accessories:
Supplied M081A13 Mounting Stud, M10 x 1.00 x 1.100, BeCu 1
Supplied M083B03 Pilot Bushing 1

(W) Water Resistant Cable

English SI
Electrical Connector Sealed Cable
Electrical Connection Position Side

Build Out Your Measurement Chain


410C01
Model: 410C01

ICP® sensor signal cond., 35mm DIN-rail ...

$902.00 USD

(Pricing valid only in the U.S.)

203B
Model: 203B

ICP® quartz force ring, 20k lb comp., 0....

$1,040.00 USD

(Pricing valid only in the U.S.)

M081A13
Model: M081A13

Mounting stud, M10x1.00 x 1.100", BeCu f...

$53.00 USD

(Pricing valid only in the U.S.)

M083B03
Model: M083B03

Pilot bushing for Models M203B & M213B

$28.00 USD

(Pricing valid only in the U.S.)

082B03
Model: 082B03

Anti-friction washer for Models (M)203B ...

$53.00 USD

(Pricing valid only in the U.S.)