Model : EX686B01 | Vibration Switch

Call for lead time
$ 535.00 USD
(Pricing valid in US only!)

Intrinsically-safe USB programmable electronic vibration switch with 2-pin MIL-C-5015 connector

The 686B01 Smart Vibration Switch is a low cost versatile and fully USB Programmable electronic vibration switch that replaces unreliable mechanical vibration switches. It is also a significantly lower cost alternative for many electronic vibration switch applications. For current version, see: Model 686C01

  • Relay: (Type)SPST, Form A or B MOSFET
  • Power Required: 24 to 240 V DC/AC 50/60 Hz
  • Electrical Connector: 2-Pin MIL-C-5015

RELATED PRODUCTS



080A118

Sensor mounting pad, adhesive or weld mount to machine, 1" diameter, 1/4-28 threaded hole for sensor mount



Add to Cart for Quote
Add To Cart
080A132

Curved surface magnet, 1.5" diameter, 55 lbf, 1/4-28 threaded hole w/mounting stud



Add to Cart for Quote
Add To Cart
English: SI:
Performance
Alarm Threshold (±10 %) 0.25 to 5 in/sec pk 4.5 to 90 mm/s rms [1]
Frequency Range (±3 dB) 420 to 60 kcpm 7 to 1000 Hz
Hysteresis (% < Alarm Threshold) 3; 6; or 10 % 3; 6; or 10 % [1]
Residual Vibration Level (Reference) Dependent or Independent Dependent or Independent [1]
Residual Vibration Level (% Alarm Threshold) 1 to 40 % 1 to 40 % [1]
MAVT (Sets Alarm Threshold to 2X actual vibration) Enabled or Disabled Enabled or Disabled [1]
Transverse Sensitivity <7 % <7 %
Power On Delay (±1 sec) 3 or 20 sec 3 or 20 sec [1]
Startup Delay (±1 sec or 1 min ) (Time) 1 to 60 sec or 1 to 30 min 1 to 60 sec or 1 to 30 min [1]
Startup Delay (x Alarm Threshold) x2; x4; x8; Blocked x2; x4; x8; Blocked [1]
Startup Delay (Active) Enabled or Disabled Enabled or Disabled [1]
Operational Delay (±1 sec) 1 to 60 sec 1 to 60 sec [1]
Relay(Type) SPST, Form A or B MOSFET SPST, Form A or B MOSFET
Relay(Latching) Latching / Non-Latching Latching / Non-Latching [1]
Relay(Contacts) Normally Open / Closed Normally Open / Closed [1]
Environmental
Temperature Range (Operating) -40 to 185 °F -40 to 85 °C
Temperature Range (Storage) -40 to 257 °F -40 to 125 °C
Overload Limit (Shock) 5000 g pk 49050 m/s² pk
Enclosure Rating IP68 IP68
Electrical
Power Required 24 to 240 V DC/AC 50/60 Hz 24 to 240 V DC/AC 50/60 Hz
Current Rating (Relay Closed) 500 mA 500 mA
Leak Current (Relay Open) ≤1 mA ≤1 mA
Electrical Isolation (Case) >100000000 Ohm >100000000 Ohm
Physical
Size - Hex 1.25 in 1.25 in
Size - Height 2.6 in 66 mm
Weight 5.2 oz 148 gm
Mounting Torque 3 to 5 ft-lb 4 to 7 Nm
Mounting Thread 1/4-28 Female 1/4-28 Female
Sensing Element (Internal) Piezoelectric Accelerometer Piezoelectric Accelerometer
Housing Material Stainless Steel Stainless Steel
Sealing Welded Hermetic Welded Hermetic
Electrical Connector 2-Pin MIL-C-5015 2-Pin MIL-C-5015
Electrical Connection Position Top Top
* All specifications are at room temperature unless otherwise specified
.


Specification Notes


[1] USB Programmable - See configuration sheet supplied with switch for exact setting.
[2] See PCB Declaration of Conformance PS096 for details.


Accessories


Supplied
081A41 Mounting stud, 1/4-28 x 0.563" long stainless steel screw with hex socket and brass tip 1


Optional Versions


( EX ) Hazardous Area Approval- contact factory for specific approvals
English SI
Hazardous Area Approval Cl I, Div 2, Groups A, B, C, D; Ex nL IICT3, AEx nA IICT3
Power Required 10 to 30 VDC
Current Rating 100 mA
Relay(Capacity) 10 to 30 VDC, 100 mA


( M ) Metric Mount
Accessories:
Supplied M081A61 Mounting Stud 1


Product Documents



Product Downloads