Intrinsically-safe, high freq triaxial, industrial, ceramic shear ICP® accel., 100 mV/g, 0.5 to 13k Hz, side exit, 4-pin M12 connector, triaxial freq sweep ISO 17025 accredited calibration
- Sensitivity:
(±10%)100 mV/g
(
10.2 mV/(m/s²))
- Measurement Range:
±50 g pk
(
±491 m/s² pk)
- Frequency Range:
(±3dB)0.5 to 13 kHz
- Electrical Connector:
4-Pin, M12
|
English: |
SI: |
|
| Performance |
| Sensitivity (±10 %) |
100 mV/g |
10.2 mV/(m/s²) |
[
1]
|
| Measurement Range |
±50 g pk |
±491 m/s² pk |
|
| Frequency Range (±5 %) |
1.5 to 5500 Hz |
1.5 to 5500 Hz |
|
| Frequency Range (±3 dB) |
0.5 to 13 kHz |
0.5 to 13 kHz |
|
| Resonant Frequency |
≥26 kHz |
≥26 kHz |
|
| Broadband Resolution (1) |
.3 mg |
3.0 mm/s2 rms |
[
3]
|
| Non-Linearity |
1 % |
1 % |
[
2]
|
| Transverse Sensitivity |
≤5 % |
≤5 % |
|
| Environmental |
| Overload Limit (Shock) |
±5000 g pk |
±5000 g pk |
|
| Temperature Range (Operating) |
-65 to 250 °F |
-54 to 121 °C |
|
| Temperature Response |
See Graph %/°F |
See Graph %/°F |
[
3]
|
| Enclosure Rating |
IP68, IP69K |
IP68, IP69K |
|
| Electrical |
| Excitation Voltage |
18 to 30 VDC |
18 to 30 VDC |
|
| Constant Current Excitation |
2 to 20 mA |
2 to 20 mA |
|
| Output Impedance |
≤150 Ohm |
≤150 Ohm |
|
| Output Bias Voltage |
8 to 12 VDC |
8 to 12 VDC |
|
| Discharge Time Constant |
≥.32 sec |
≥.32 sec |
|
| Settling Time (within 10% of bias) |
<2 sec |
<2 sec |
|
| Spectral Noise (1 Hz) |
90 µg/√Hz |
883 (µm/sec2)/√Hz |
[
1]
[
3]
|
| Spectral Noise (10 Hz) |
20 µg/√Hz |
196 (µm/sec2)/√Hz |
[
1]
[
3]
|
| Spectral Noise (100 Hz) |
10 µg/√Hz |
98.1 (µm/sec2)/√Hz |
[
1]
[
3]
|
| Spectral Noise (1 kHz) |
3.0 µg/√Hz |
29.4 (µm/sec2)/√Hz |
[
1]
[
3]
|
| Electrical Isolation (Case) |
≥100000000 Ohm |
≥100000000 Ohm |
|
| Physical |
| Sensing Element |
Ceramic |
Ceramic |
|
| Sensing Geometry |
Shear |
Shear |
|
| Housing Material |
Stainless Steel |
Stainless Steel |
|
| Sealing |
Hermetic |
Hermetic |
|
| Size - Height |
.72 in |
18.3 mm |
|
| Size - Length |
.95 in |
24.1 mm |
|
| Size - Width |
.95 in |
24.1 mm |
|
| Weight (Maximum) |
3.0 oz |
85 gm |
|
| Electrical Connector |
4-Pin, M12 |
4-Pin, M12 |
|
| Electrical Connection Position |
Side |
Side |
|
| Mounting |
Through Hole |
Through Hole |
|
| Mounting Torque (Through Bolt) |
2 to 5 ft-lb |
2.7 to 6.8 n-M |
|
* All specifications are at room temperature unless otherwise specified
.
Specification Notes
[
1]
Conversion Factor 1g = 9.81 m/s².
[
2]
Zero-based, least-squares, straight line method.
[
3]
Typical.
[
1]
Conversion Factor 1g = 9.81 m/s².
[
3]
Typical.
[
4]
See PCB Declaration of Conformance PS023 for details.
Accessories
|
|
|
| Supplied |
| 081A119 |
Captive mounting bolt 1/4-28 x .625" |
1 |
| ACS-1T |
Triaxial amplitude response calibration, from 10 Hz to upper 5% frequency, NIST traceable |
1 |
Optional Versions
(
M )
Metric Mount
| Accessories: |
| Supplied |
M081A119 |
Accessory for IMI Sensors Product |
0 |