Model: 682A02

$285.00 USD
(Pricing valid in US only)

139 units In stock!

Click for lead times

DIN rail mount ICP® signal conditioner, 24 VDC input

ICP Signal Conditioner, Din Rail mounted. 18 VDC excitation voltage, with internally jumper selectable excitation current and voltage gain.

  • DC Power: (±10%) 24 VDC

Add this product to my product comparison
Compare selected models ()

 English:SI: 
Performance
Channels1 1  
Voltage Gain1/10/100 1/10/100 [2] 
Frequency Range (±1 dB)60 to 6000000 cpm1 to 100000 Hz[1] 
Non-Linearity≤2 %≤2 % 
Environmental
Temperature Range32 to 158 °F0 to 70 °C 
Electrical
Power Required (Standard)DC PowerDC Power 
DC Power (±10 %)24 VDC24 VDC 
DC Power≤60 mA≤60 mA 
Excitation Voltage (±1 VDC) (To Sensor)18 VDC18 VDC[4] 
Constant Current Excitation (To Sensor)4/10 mA4/10 mA[2] 
Spectral Noise (10 Hz)0.8 µV/√Hz0.8 µV/√Hz[3][5] 
Spectral Noise (100 Hz)0.5 µV/√Hz0.5 µV/√Hz[3][5] 
Spectral Noise (1 kHz)0.5 µV/√Hz0.5 µV/√Hz[3][5] 
Spectral Noise (10 kHz)0.6 µV/√Hz0.6 µV/√Hz[3][5] 
Broadband Electrical Noise (1 to 10 kHz)50 µV50 µV[3][5] 
Spectral Noise (10 Hz)7.5 µV/√Hz7.5 µV/√Hz[3][6] 
Spectral Noise (100 Hz)3.6 µV/√Hz3.6 µV/√Hz[3][6] 
Spectral Noise (1 kHz)3.2 µV/√Hz3.2 µV/√Hz[3][6] 
Spectral Noise (10 kHz)6.0 µV/√Hz6.0 µV/√Hz[3][6] 
Broadband Electrical Noise (1 to 10 kHz)400 µV400 µV[3][6] 
Spectral Noise (10 Hz)80 µV/√Hz80 µV/√Hz[3][7] 
Spectral Noise (100 Hz)40 µV/√Hz40 µV/√Hz[3][7] 
Spectral Noise (1 kHz)32 µV/√Hz32 µV/√Hz[3][7] 
Spectral Noise (10 kHz)50 µV/√Hz50 µV/√Hz[3][7] 
Broadband Electrical Noise (1 to 10 kHz)3.5 mV3.5 mV[3][7] 
Fuse1 A1 A 
Physical
Electrical Connector (ICP® Sensor Input)Screw TerminalsScrew Terminals 
Electrical Connector (Output)Screw TerminalsScrew Terminals 
Electrical Connector (DC Power Input)Screw TerminalsScrew Terminals 
MountingDIN RailDIN Rail 
Size - Height3.1 in78.7 mm 
Size - Width0.97 in24.6 mm 
Size - Depth3.3 in83.8 mm 
Weight0.194 lb0.088 kg 

All specifications are at room temperature unless otherwise specified.



Product Notes
[1] 1Hz = 60 cpm (cycles per minute).
[2] Jumper selectable on internal circuit board.
[3] Typical.
[4] If unit is used in conjunction with a sensor having a bias over 13 VDC, full scale output may be affected or sensor may not power up.
[5] Gain x1
[6] Gain x10
[7] Gain x100
Accessories:
No Accessories
Optional Versions:
No optional versions
Product Documents
Additional Downloads None Listed