Low cost embeddable accelerometer, 2-wire ICP®, 100 mV/g, TO5 housing, positive output, header pins
- Sensitivity: (±20%)100 mV/g
(1.02 mV/(m/s²))
- Frequency Range: (±3dB)0.5 to 10k Hz
(0.5 to 10k Hz)
- Sensing Element: Ceramic
- Measurement Range: 50 g
(490 m/s²)
- Weight: 0.01 oz
(3 gm)
|
English: |
SI: |
|
Performance |
Sensitivity (±20 %) |
100 mV/g |
1.02 mV/(m/s²) |
[1]
[5]
|
Measurement Range |
50 g |
490 m/s² |
|
Frequency Range (±3 dB) |
0.5 to 10k Hz |
0.5 to 10k Hz |
[3]
[6]
|
Resonant Frequency |
>25 kHz |
>25 kHz |
[6]
|
Broadband Resolution |
350 µg rms |
3434 µm/sec2 rms |
[4]
|
Non-Linearity |
≤1 % |
≤1 % |
[2]
|
Transverse Sensitivity |
≤7 % |
≤7 % |
|
Environmental |
Overload Limit (Shock) |
5000 g pk |
49k m/s² pk |
|
Temperature Range (Operating) |
-65 to +185 °F |
-54 to -84 °C |
|
Temperature Response |
See Graph |
See Graph |
[4]
|
Electrical |
Settling Time (within 1% of bias) |
≤2 sec |
≤2 sec |
|
Discharge Time Constant |
≥0.3 sec |
≥0.3 sec |
|
Excitation Voltage |
18 to 28 VDC |
18 to 28 VDC |
|
Constant Current Excitation |
2 to 20 mA |
2 to 20 mA |
|
Output Impedance |
<150 Ohm |
<150 Ohm |
|
Output Bias Voltage |
8 to 12 VDC |
8 to 12 VDC |
|
Spectral Noise (10 Hz) |
8 µg/√Hz |
78.50 (µm/sec2)/√Hz |
[4]
|
Spectral Noise (100 Hz) |
5 µg/√Hz |
49.1 (µm/sec2)/√Hz |
[4]
|
Spectral Noise (1 kHz) |
4 µg/√Hz |
39.2 (µm/sec2)/√Hz |
[4]
|
Physical |
Size - Lip Diameter |
0.36 in |
9.1 mm |
|
Size - Height |
0.38 in |
9.7 mm |
|
Weight |
0.01 oz |
3 gm |
|
Mounting |
Adhesive/Solder |
Adhesive/Solder |
|
Sensing Element |
Ceramic |
Ceramic |
|
Sensing Geometry |
Shear |
Shear |
|
Housing Material |
Stainless Steel |
Stainless Steel |
|
Sealing |
Welded Hermetic |
Welded Hermetic |
|
Electrical Connector |
Header Pins |
Header Pins |
|
Electrical Connection Position |
Bottom |
Bottom |
|
Electrical Connections (Pin 1) |
Signal / Power |
Signal / Power |
|
Electrical Connections (Pin 2) |
Neg (-) Ground |
Neg (-) Ground |
|
Electrical Connections (Pin 3) |
No Connection |
No Connection |
|
* All specifications are at room temperature unless otherwise specified
.


Specification Notes
[1] Conversion Factor 1g = 9.81 m/s².
[2] Zero-based, least-squares, straight line method.
[3] The high frequency tolerance is accurate within ±10% of the specified frequency.
[4] Typical.
[5] Positive output along Z-axis (in upward direction when pin mounted).
[6] Performance depends on mounting
[4] Typical.
[7] See PCB Declaration of Conformance PS023 or PS060 for details.
Accessories
|
|
|
Supplied |
ICS-2 |
Calibration of industrial accel., single-point, 100 Hz reference sensitivity |
1 |
Optional Versions
( HT ) High temperature, extends normal operation temperatures
Temperature Range |
-65 to 250 |
-54 to 121 |