Model: 607A61

$315.00 USD
(Pricing valid in US only)

35 units In stock!

Click for lead times

Low profile industrial ICP® accel, 100 mV/g, 0.5 to 10k Hz, side exit, 10-ft armored jacketed cable & swiveler base, single point ISO 17025 accredited calibration

US patent number 6.435.902

  • Sensitivity: (±15%) 100 mV/g (10.2 mV/(m/s²))
  • Frequency Range: (±3dB) 30 to 600000 cpm (0.5 to 10000 Hz)
  • Sensing Element: Ceramic
  • Measurement Range: ±50 g (±490 m/s²)
  • Weight: 1.1 oz (31 gm)

Add this product to my product comparison
Compare selected models ()

Additional Configurations:
Sensitivity (±15 %)100 mV/g10.2 mV/(m/s²)[1] 
Measurement Range±50 g±490 m/s² 
Frequency Range (±3 dB)30 to 600000 cpm0.5 to 10000 Hz 
Resonant Frequency1500 kcpm25 kHz[3] 
Broadband Resolution (1 to 10000 Hz)350 µg3434 µm/sec2[3] 
Non-Linearity±1 %±1 %[2] 
Transverse Sensitivity≤7 %≤7 % 
Overload Limit (Shock)5000 g pk49050 m/s² pk 
Temperature Range-65 to +250 °F-54 to +121 °C 
Temperature ResponseSee Graph %/°FSee Graph %/°F[3] 
Enclosure RatingIP67IP67 
Settling Time (within 1% of bias)≤2 sec≤2 sec 
Discharge Time Constant≥0.3 sec≥0.3 sec 
Excitation Voltage18 to 28 VDC18 to 28 VDC 
Constant Current Excitation2 to 20 mA2 to 20 mA 
Output Impedance<150 Ohm<150 Ohm 
Output Bias Voltage8 to 12 VDC8 to 12 VDC 
Spectral Noise (10 Hz)8 µg/√Hz78.5 (µm/sec2)/√Hz[3] 
Spectral Noise (100 Hz)5 µg/√Hz49.1 (µm/sec2)/√Hz[3] 
Spectral Noise (1 kHz)4 µg/√Hz39.2 (µm/sec2)/√Hz[3] 
Electrical Isolation (Case)>100000000 Ohm>100000000 Ohm 
Size - Hex9/16 in14 mm 
Size - Height1.0 in25.4 mm 
Weight (without cable)1.1 oz31 gm[6] 
Mounting Thread1/4-28 Male1/4-28 Male[4] 
Mounting Torque (Stud)3 to 4 ft-lb4.1 to 5.4 Nm[5][8] 
Mounting Torque (hex nut)2 to 3 ft-lb2.7 to 4.1 Nm 
Sensing ElementCeramicCeramic 
Sensing GeometryShearShear 
Housing MaterialStainless SteelStainless Steel 
SealingWelded HermeticWelded Hermetic 
Electrical ConnectorIntegral Armored CableIntegral Armored Cable 
Electrical Connection PositionSideSide 
Cable Length10 ft3.0 m 
Cable TypePolyurethanePolyurethane[7] 

All specifications are at room temperature unless otherwise specified.


Product Notes
[1] Conversion Factor 1g = 9.81 m/s².
[2] Zero-based, least-squares, straight line method.
[3] Typical.
[4] 1/4-28 has no equivalent in S.I. units.
[5] Stud torque must exceed sensor hex nut torque to ensure proper dismantling.
[6] Measured with mounting stud.
[7] Stainless steel armor jacket over twisted shielded pair.
[8] 1/8" hex Allen key required for English version, 3mm hex Allen key required for metric version.
[9] See PCB Declaration of Conformance PS023 or PS060 for details.
ICS-2NIST-traceable single-point amplitude response calibration at 6000 cpm (100 Hz) for each axis(1)
080A156Mounting Base(1)
Optional Versions:
(EX) Hazardous Area Approval- contact factory for specific approvals
    Hazardous Area ApprovalEEx nL IIC T4, -40°C<=Ta<=121°C, II 3 G
    Hazardous Area ApprovalEEx nL IIC T4, -40°C<=Ta<=121°C, II 1 G
    Hazardous Area ApprovalCl I, Div I, Groups A, B, C, D; Cl II, Div I, Groups E, F, G; Cl III, Div I
    Hazardous Area ApprovalCl I, Div 2, Groups A, B, C, D; ExnL IIC T4, AExnA IIC T4
    Hazardous Area ApprovalEx ia IIC T4, AExia IIC, T4
(M) Metric Mount
    M080A159AAccessory for IMI Sensors Product(1)
(TO) Temperature Output
    Temperature Output Range+36 to +250 °F+2 to +121 °C
    Temperature Scale Factor5.56 mV/°F + 32+10 mV/°C
    Electrical ConnectorIntegral Armored Cable
    Electrical Connections (Red)Acceleration Output
    Electrical Connections (Black)Ground
    Electrical Connections (White)Temperature Output
Product Documents
Additional Downloads None Listed