Products

flange rotary transformer torque transducer, 1,000 in-lb/83 ft-lb (113 n-m) rated capacity, 200% static overload protection, spline shaft drive

ROTARY TORQUE SENSOR (TRANS) 1K LB-IN

Model 4115A-06A

Add to Quote
  • CE
  • IP

Flange Rotary Transformer Torque Transducer, 1,000 in-lb/83 ft-lb (113 N-m) rated capacity, 200% static overload protection, spline shaft drive

Speed sensor sold separately.
  • Measurement Range: 1000 in-lb (115 Nm)
  • Sensitivity: (±15%)2.5 mV/V (2.5 mV/V)
  • Non-Linearity: <=0.05 % FS
  • Mounting: Splined
  • Maximum Speed: 15000 RPM

Specification Notes

[1] Nominal.
[2] FS - Full Scale.
[3] Over compensated operating temperature range.
[1] Nominal.
[2] FS - Full Scale.
[4] Recommended 10 VAC RMS.
[5] See PCB Declaration of Conformance PS062 for details.

English: SI:
Performance
Measurement Range (Full Scale Capacity) 1000 in-lb 115 Nm [1]
Sensitivity (±15 %) (output at rated capacity) 2.5 mV/V 2.5 mV/V [1] [2]
Non-Linearity ≤0.05 % FS ≤0.05 % FS [2]
Hysteresis ≤0.05 % FS ≤0.05 % FS [2]
Non-Repeatability ≤0.03 % FS ≤0.03 % FS [2]
Environmental
Overload Limit 1500 in-lb 170 Nm
Temperature Range (Operating) -65 to 285 °F -54 to 141 °C
Temperature Range (Compensated) +70 to +170 °F +21 to 77 °C
Temperature Effect on Output (Maximum) ±0.002 %Reading/°F ±0.0036 %Reading/°C [3]
Temperature Effect on Zero Balance (Maximum) ±0.002 %FS/°F ±0.0036 %FS/°C [2] [3]
Electrical
Bridge Resistance 350 Ohm 350 Ohm [1]
Excitation Frequency 3.28 kHz 3.28 kHz
Excitation Voltage 5 to 10 VAC rms 5 to 10 VAC rms [4]
Bridge Current (at 5 VAC) 50 mA 50 mA
Insulation Resistance >5000000 kohm >5000000 kohm
Zero Balance ≤2 % FS ≤2 % FS [2]
Physical
Size - Shaft Length 9.10 in 23.14 mm
Size - Housing Length 8.25 in 209.55 mm
Size - Housing Height 6.00 in 152.40 mm
Weight 46 lb 20.9 kg
Mounting Splined Splined
Sensing Element Strain Gage Strain Gage
Housing Material Black Oxided Steel Black Oxided Steel
Shaft Material Steel Steel
Electrical Connector MS3102A-14S-5P MS3102A-14S-5P
Electrical Connection Position Side Side
Torsional Stiffness 94000 in-lb/radian 10600 N-m/radian
Rotating Inertia 0.005 in-lb sec2 0.0006 N-m sec2
Maximum Speed 15000 RPM 15000 RPM

* All specifications are at room temperature unless otherwise specified.

Accessories
Supplied
180-019A Mating conn., 5-socket (F) (for Series 3100, 4100 & 4200) 1
8113-105A Relay activated precision shunt calibration module 1