Seismic, ceramic shear ICP® accel., 1 V/g, 0.5 to 2k Hz, 2-pin top conn.
- Sensitivity:
(±5%)1000 mV/g
(
102 mV/(m/s²))
- Broadband Resolution:
0.00001 g rms
(
0.0001 m/s² rms)
- Measurement Range:
±5 g pk
(
±49 m/s² pk)
- Frequency Range:
(±5%)0.5 to 2000 Hz
- Electrical Connector:
2-Pin MIL-C-5015
- Weight:
7.4 oz
(
210 gm)
RELATED PRODUCTS
|
English: |
SI: |
|
Performance |
Sensitivity (±5 %) |
1000 mV/g |
102 mV/(m/s²) |
|
Measurement Range |
±5 g pk |
±49 m/s² pk |
|
Frequency Range (±5 %) |
0.5 to 2000 Hz |
0.5 to 2000 Hz |
|
Frequency Range (±10 %) |
0.3 to 4000 Hz |
0.3 to 4000 Hz |
|
Frequency Range (±3 dB) |
0.2 to 6000 Hz |
0.2 to 6000 Hz |
|
Resonant Frequency |
≥10000 Hz |
≥10000 Hz |
|
Broadband Resolution (1) |
0.00001 g rms |
0.0001 m/s² rms |
[
2]
|
Non-Linearity |
≤1 % |
≤1 % |
[
1]
|
Transverse Sensitivity |
≤7 % |
≤7 % |
|
Environmental |
Overload Limit (Shock) |
±5000 g pk |
±49050 m/s² pk |
|
Temperature Range |
-65 to +250 °F |
-54 to +121 °C |
|
Temperature Response |
See Graph %/°F |
See Graph %/°F |
|
Base Strain Sensitivity |
≤0.0005 g/µε |
≤0.005 (m/s²)/µε |
[
2]
|
Electrical |
Excitation Voltage |
18 to 30 VDC |
18 to 30 VDC |
|
Constant Current Excitation |
2 to 20 mA |
2 to 20 mA |
|
Output Impedance |
<250 Ohm |
<250 Ohm |
|
Output Bias Voltage |
8 to 12 VDC |
8 to 12 VDC |
|
Discharge Time Constant |
1 to 3 sec |
1 to 3 sec |
|
Settling Time |
<15 sec |
<15 sec |
|
Spectral Noise (1 Hz) |
2 µg/√Hz |
20 (µm/sec2)/√Hz |
[
2]
|
Spectral Noise (10 Hz) |
0.5 µg/√Hz |
5 (µm/sec2)/√Hz |
[
2]
|
Spectral Noise (100 Hz) |
0.2 µg/√Hz |
2 (µm/sec2)/√Hz |
[
2]
|
Spectral Noise (1 kHz) |
0.1 µg/√Hz |
1 (µm/sec2)/√Hz |
[
2]
|
Electrical Isolation (Case) |
≥100000000 Ohm |
≥100000000 Ohm |
|
Physical |
Sensing Element |
Ceramic |
Ceramic |
|
Sensing Geometry |
Shear |
Shear |
|
Housing Material |
Stainless Steel |
Stainless Steel |
|
Sealing |
Hermetic |
Hermetic |
|
Size - Hex |
1 3/16 in |
30.2 mm |
|
Size - Height |
2 3/16 in |
55.6 mm |
|
Weight |
7.4 oz |
210 gm |
[
2]
|
Electrical Connector |
2-Pin MIL-C-5015 |
2-Pin MIL-C-5015 |
|
Electrical Connection Position |
Top |
Top |
|
Mounting Thread |
1/4-28 Female |
1/4-28 Female |
|
Mounting Torque |
2 to 5 ft-lb |
3 to 7 Nm |
|
* All specifications are at room temperature unless otherwise specified
.

Specification Notes
[
1]
Zero-based, least-squares, straight line method.
[
2]
Typical.
[
3]
See PCB Declaration of Conformance PS023 for details.
Accessories
|
|
|
Supplied |
081B20 |
Mounting stud, 1/4-28 to 1/4-28 x 0.365" long, BeCu w/shoulder |
1 |
085A31 |
Protective insulated boot |
1 |
ACS-1 |
Single axis amplitude response calibration from 10 Hz to upper 5% frequency, NIST traceable |
1 |
ACS-4 |
Single axis, low frequency phase and amplitude response cal from 0.5 to 10 Hz, (requires ACS-1 and minimum sensitivity of 20 mV/g) |
1 |
M081B20 |
Metric mounting stud, 1/4-28 to M6 x 0.75, BeCu w/shoulder |
1 |
Optional Versions
(
T )
TEDS Capable of Digital Memory and Communication Compliant with IEEE P1451.4
Output Bias Voltage |
8.5 to 12.5 |