Products

rugged microphone kit, 378b02 microphone & preamplifier, 079a52 rugged grid cap & 079a59 calibration adaptor

RUGGED MIC KIT, 378B02, 079A52, 079A59

Model 379A12

Retrieving Price...

(Pricing valid only in the U.S.)

Units in Stock Lead Times
More on the way Call for Lead Time
  • CE
  • IP

Rugged Microphone Kit, 378B02 Microphone & Preamplifier, 079A52 Rugged Grid Cap & 079A59 Calibration Adaptor

  • Nominal Microphone Diameter: 1/2"
  • Frequency Response Characteristic: Free-Field
  • Frequency Range: (±2dB)3.75 to 20000 Hz
  • Inherent Noise: 15.5 dB(A) re 20 µPa
  • Dynamic Range: 137 dB re 20 µPa

Specification Notes


[1] Typical.
[2] TEDS Capable Digital Communication, compliant with IEEE 1451.4
[3] re 250 Hz
[4] Standard Grid Cap Installed
[5] Rugged Grid Cap Installed
[1] Typical.
[3] re 250 Hz
[6] Prepolarized
[1] Typical.
[7] Venting through Preamp.
[4] Standard Grid Cap Installed
[5] Rugged Grid Cap Installed
[8] See PCB Declaration of Conformance PS064 for details.

English: SI:
Performance
Nominal Microphone Diameter 1/2" 1/2"
Frequency Response Characteristic (at 0° incidence) Free-Field Free-Field
Sensitivity (±1.5 dB) -26 dB re 1 V/Pa -26 dB re 1 V/Pa [3]
Sensitivity 50 mV/Pa 50 mV/Pa [3]
Frequency Range (±2 dB) 3.75 to 20000 Hz 3.75 to 20000 Hz [4]
Frequency Range (±1 dB) 7 to 10000 Hz 7 to 10000 Hz [4]
Frequency Range (±2 dB) 3.75 to 20000 Hz 3.75 to 20000 Hz [5]
Frequency Range (±1 dB) 7 to 4000 Hz 7 to 4000 Hz [5]
Lower Limiting Frequency (3) 1.0 to 3.0 Hz 1.0 to 3.0 Hz
Inherent Noise 15.5 dB(A) re 20 µPa 15.5 dB(A) re 20 µPa [1]
Dynamic Range (3% Distortion Limit) 137 dB re 20 µPa 137 dB re 20 µPa [1]
TEDS Compliant Yes Yes [2]
Environmental
Temperature Range (Operating) -40 to +176 °F -40 to +80 °C
Temperature Coefficient of Sensitivity (+14 to +158°F (-10 to +70°C)) 0.005 dB/°F 0.009 dB/°C [1] [3]
Static Pressure Coefficient -0.013 dB/kPa -0.013 dB/kPa [1] [3]
Humidity Coefficient of Sensitivity (0 to 100%, non-condensing) ±0.001 dB/%RH ±0.001 dB/%RH [3]
Influence of Axial Vibration (0.1g (1 m/s²)) 63 dB re 20 µPa 63 dB re 20 µPa [1]
Electrical
Polarization Voltage 0 V 0 V [6]
Excitation Voltage 20 to 30 VDC 20 to 30 VDC
Constant Current Excitation 2 to 20 mA 2 to 20 mA
Output Bias Voltage 10 to 14 VDC 10 to 14 VDC
Maximum Output Voltage ±7 Vpk ±7 Vpk
Output Impedance <50 Ohm <50 Ohm
Physical
Housing Material Stainless Alloy Stainless Alloy
Venting Rear Rear [7]
Electrical Connector BNC Jack BNC Jack
Mounting Thread (Grid) 0.5 - 60 UNS 0.5 - 60 UNS
Size - Diameter (with standard grid) 0.52 in 13.2 mm [4]
Size - Diameter (with rugged grid) 0.57 in 14.5 mm [5]
Size - Diameter (without grid) 0.50 in 12.7 mm
Size - Height (with standard grid) 3.62 in 91.9 mm [4]
Size - Height (with rugged grid) 3.62 in 91.9 mm [5]
Size - Height (without grid) 3.58 in 90.9 mm
Weight 1.63 oz 45.8 gm [1] [4]
Weight 1.72 oz 48.7 gm [1] [5]

* All specifications are at room temperature unless otherwise specified.

Accessories


Supplied
079A52 RUGGED GRID CAP FOR 0.5 INCH (12 MM) DIAMETER HIGH SENSITIVITY MICROPHONES 1
079A59 CAL250 calibration adaptor for ½” Dia rugged microphone grid cap 1
ACS-63 Calibration for microphone/preamplifier with TEDS programming 1

Build Out Your Measurement Chain


079A52
Model: 079A52

RUGGED GRID CAP FOR 0.5 INCH (12 MM) DIA...

$195.00 USD

(Pricing valid only in the U.S.)