Model: 3741B1210G



 English:SI: 
Performance
Sensitivity (±5 %)200 mV/g20.4 mV/(m/s²)[3] 
Measurement Range±10 g pk±98.1 m/s² pk 
Frequency Range (±5 %)0 to 1000 Hz0 to 1000 Hz 
Frequency Range (±10 )0 to 1500 Hz0 to 1500 Hz 
Resonant Frequency>2000 Hz>2000 Hz 
Phase Response (100 Hz)<10 °<10 ° 
Broadband Resolution (0.5 to 100 Hz)1.2 mg rms0.012 m/s² rms[2] 
Non-Linearity≤1 % FS≤1 % FS[1] 
Transverse Sensitivity≤3 %≤3 % 
Environmental
Overload Limit (Shock)±3000 g pk±29420 m/s² pk 
Temperature Range (Operating)-65 to 250 °F-54.0 to 121 °C 
Temperature Range (Storage)-65 to 250 °F-54.0 to 121 °C 
Temperature Coefficient of Sensitivity±3.0 %±3.0 % 
Zero g Offset Temperature Coefficient±2.0 % FSO±2.0 % FSO[4][5] 
Base Strain Sensitivity.0001 g/µε.001 (m/s²)/µε[2] 
Electrical
Excitation Voltage6 to 30 VDC6 to 30 VDC 
Current Consumption≤6 mA≤6 mA 
Output Impedance≤100 Ohm≤100 Ohm 
Offset Voltage±40 mVDC±40 mVDC[6] 
Common Mode Voltage (±0.1 VDC)+2.5 VDC+2.5 VDC 
Spectral Noise (1 to 100 Hz)107.9 µg/√Hz1058 (µm/sec2)/√Hz[2] 
Electrical Isolation (Case)>100000000 Ohm>100000000 Ohm[7] 
Physical
Housing MaterialAnodized AluminumAnodized Aluminum 
SealingEpoxyEpoxy 
Size - Height0.30 in7.62 mm 
Size - Length1.00 in25.4 mm 
Size - Width.85 in21.6 mm 
Weight (without cable)0.35 oz9.92 gm[2] 
Electrical ConnectorIntegral CableIntegral Cable 
Electrical Connection PositionSideSide 
Cable TerminationPigtail EndsPigtail Ends 
Cable Type010 4-cond Shielded010 4-cond Shielded 
Cable Length10 ft3 m 
MountingThrough Holes (2)Through Holes (2) 

All specifications are at room temperature unless otherwise specified.


CE

Product Notes
[1] Zero-based, least-squares, straight line method.
[2] Typical.
[3] Measured at 100 Hz, 1 grms.
[4] FSO = Full Scale Output over the Measurement Range (4VDC).
[5] -65 to +250 °F, ref. 75 °F (-54 to +121 °C, ref. 24 °C)
[6] Offset tolerance is based on manufacturers supplied cable length.
[7] Case and shield to mounting surface or cable leads.
[8] See PCB Declaration of Conformance PS027 for details.
Accessories:
Optional
080A208Triaxial mounting block(1)
Supplied
081A103Mounting screw(2)
ACS-85Phase and Magnitude calibration from 0.5 Hz to 5% pt Linear scale(1)
M081A103Mounting screw and washer, M3 x 0.5 thread(2)
Optional Versions:
No optional versions