Triaxial MEMS DC accelerometer, 675 mV/g, 2 g, 9-pin socket
- Sensitivity: (±3%)675 mV/g
(68.8 mV/(m/s²))
- Measurement Range: ±2 g pk
(±19.6 m/s² pk)
- Electrical Connector: 9-Pin
(9-Pin)
- Weight: 0.6 oz
(17.3 gm)
RELATED PRODUCTS
|
English: |
SI: |
|
| Performance |
| Sensitivity (±3 %) |
675 mV/g |
68.8 mV/(m/s²) |
[3]
|
| Measurement Range |
±2 g pk |
±19.6 m/s² pk |
|
| Frequency Range (±5 %) |
0 to 250 Hz |
0 to 250 Hz |
|
| Frequency Range (±10 %) |
0 to 350 Hz |
0 to 350 Hz |
|
| Resonant Frequency |
1.2 kHz |
1.2 kHz |
[2]
|
| Phase Response (10 Hz) |
<2.5 ° |
<2.5 ° |
|
| Non-Linearity |
≤1 % |
≤1 % |
[1]
|
| Broadband Resolution (0.5) |
0.1 mg rms |
0.001 m/s² rms |
[2]
|
| Transverse Sensitivity |
≤3 % |
≤3 % |
|
| Environmental |
| Overload Limit (Shock) |
±3000 g pk |
±29420 m/s² pk |
|
| Temperature Range (Operating) |
-65 to +250 °F |
-54.0 to +121 °C |
|
| Temperature Range (Storage) |
-65 to +250 °F |
-54.0 to +121 °C |
|
| Temperature Coefficient of Sensitivity |
±2.5 % |
±2.5 % |
[4]
|
| Zero g Offset Temperature Coefficient |
±1.5 % FSO |
±1.5 % FSO |
[4]
[5]
|
| Base Strain Sensitivity |
0.001 g/µε |
0.01 (m/s²)/µε |
[2]
|
| Magnetic Sensitivity |
200 µg/gauss |
19.6 (m/s²)/Tesla |
[2]
|
| Electrical |
| Excitation Voltage |
5 to 32 VDC |
5 to 32 VDC |
|
| Current Consumption |
≤15 mA |
≤15 mA |
|
| Output Impedance |
≤120 Ohm |
≤120 Ohm |
|
| Offset Voltage |
±20 mVDC |
±20 mVDC |
[6]
|
| Spectral Noise |
10 µg/√Hz |
98.1 (µm/sec2)/√Hz |
[2]
|
| Electrical Isolation (Case) |
>100000000 Ohm |
>100000000 Ohm |
|
| Physical |
| Housing Material |
Titanium |
Titanium |
|
| Sealing |
Hermetic |
Hermetic |
|
| Size - Length |
0.8 in |
20.3 mm |
|
| Size - Width |
0.8 in |
20.3 mm |
|
| Size - Height |
0.8 in |
20.3 mm |
|
| Weight |
0.6 oz |
17.3 gm |
|
| Electrical Connector |
9-Pin |
9-Pin |
|
| Electrical Connection Position |
Side |
Side |
|
| Mounting Thread |
10-32 Female |
10-32 Female |
|
* All specifications are at room temperature unless otherwise specified
.
Specification Notes
[1] Zero-based, least-squares, straight line method.
[2] Typical.
[3] Measured at 5 Hz, 0.5 grms.
[2] Typical.
[4] -65 to +250 °F, ref. 75 °F (-54 to +121 °C, ref. 24 °C)
[5] FSO= Full Scale Output over the Measurement Range
[2] Typical.
[6] Offset tolerance is based on 10 ft of 037 test cable.
[7] See PCB Declaration of Conformance PS027 for details.
Accessories
|
|
|
| Supplied |
| 080A12 |
Adhesive mtg base, 0.75" hex x 0.2" thk, 10-32 tapped hole, aluminum w/insulating hardcoat finish |
1 |
| 081B05 |
Mounting stud, 10-32 to 10-32, 0.275" long, BeCu w/shoulder |
1 |
| ACS-85T |
Triaxial Phase and Magnitude Calibration form 0.5 Hz to 5% pt on linear scale |
1 |
| M081B05 |
Mounting stud, 10-32 to M6x0.75-6g, 0.275" long, BeCu |
1 |