Triaxial MEMS DC accelerometer, 40 mV/g, +/-50 g, +6 to 30 VDC excitation
- Sensitivity: (±3%)40 mV/g
(4.1 mV/(m/s²))
- Measurement Range: ±50 g pk
(±490.5 m/s² pk)
- Electrical Connector: 9-Pin
- Weight: 0.8 oz
(22.7 gm)
RELATED PRODUCTS
|
English: |
SI: |
|
Performance |
Sensitivity (±3 %) |
40 mV/g |
4.1 mV/(m/s²) |
[2]
|
Measurement Range |
±50 g pk |
±490.5 m/s² pk |
|
Frequency Range (±3 dB) |
0 to 2000 Hz |
0 to 2000 Hz |
[1]
|
Frequency Range (±3 dB) |
0 to 1000 Hz |
0 to 1000 Hz |
[4]
|
Phase Response (100 Hz) |
<10 ° |
<10 ° |
|
Non-Linearity |
≤1 % |
≤1 % |
[3]
|
Broadband Resolution (0.5) |
1.0 mg rms |
0.010 m/s² rms |
[1]
|
Transverse Sensitivity |
≤5 % |
≤5 % |
|
Environmental |
Overload Limit (Shock) |
±5000 g pk |
±49050 m/s² pk |
|
Temperature Range (Operating) |
-65 to +250 °F |
-54.0 to +121 °C |
|
Temperature Range (Storage) |
-65 to +250 °F |
-54.0 to +121 °C |
|
Temperature Coefficient of Sensitivity |
±3 % |
±3 % |
[6]
|
Zero g Offset Temperature Coefficient |
±2 % FSO |
±2 % FSO |
[5]
[6]
|
Base Strain Sensitivity (Measured at 250 µε) |
.001 g/µε |
.01 (m/s²)/µε |
[1]
|
Magnetic Sensitivity |
100 µg/gauss |
9.8 (m/s²)/Tesla |
[1]
|
Electrical |
Excitation Voltage |
6 to 30 VDC |
6 to 30 VDC |
|
Current Consumption |
≤30 mA |
≤30 mA |
|
Output Impedance |
≤120 Ohm |
≤120 Ohm |
|
Offset Voltage |
±80 mVDC |
±80 mVDC |
[7]
|
Spectral Noise (1) |
200 µg/√Hz |
1962 (µm/sec2)/√Hz |
[1]
|
Electrical Isolation (Case) |
>100000000 Ohm |
>100000000 Ohm |
|
Physical |
Housing Material |
Titanium |
Titanium |
|
Sealing |
Hermetic |
Hermetic |
|
Size - Length |
0.85 in |
21.6 mm |
|
Size - Width |
0.85 in |
21.6 mm |
|
Size - Height |
0.85 in |
21.6 mm |
|
Weight |
0.8 oz |
22.7 gm |
|
Electrical Connector |
9-Pin |
9-Pin |
|
Electrical Connection Position |
Side |
Side |
|
Mounting Thread |
10-32 Female |
10-32 Female |
|
* All specifications are at room temperature unless otherwise specified
.

Specification Notes
[1] Typical.
[2] Measured at 100 Hz.
[3] Least-squares, straight line method, % FSO.
[4] Minimum, verified with Calibration data.
[1] Typical.
[5] FSO = Full Scale Output over the Measurement Range (4VDC).
[6] -65 to +250 °F, ref. 75 °F (-54 to +121 °C, ref. 24 °C)
[1] Typical.
[7] Offset tolerance is based on 10 ft of 037 test cable.
[8] See PCB Declaration of Conformance PS027 for details.
Accessories
|
|
|
Supplied |
080A12 |
Adhesive mtg base, 0.75" hex x 0.2" thk, 10-32 tapped hole, aluminum w/insulating hardcoat finish |
1 |
081B05 |
Mounting stud, 10-32 to 10-32, 0.275" long, BeCu w/shoulder (for series 3713) |
1 |
ACS-145T |
Triaxial calibration, 3713E, Phase and Magnitude from 2 Hz to 3 dB using log scale (1) |
1 |
M081B05 |
Mounting stud, 10-32 to M6x0.75-6g, 0.275" long, BeCu (for series 3713) |
1 |