Model : 3713E112G

Call for lead time
$ 1,775.00 USD
(Pricing valid in US only)

Triaxial MEMS DC accelerometer, 1000 mV/g, +/-2 g, +6 to 30 VDC excitation

  • Sensitivity: (±3%)1000 mV/g (101.9 mV/(m/s²))
  • Measurement Range: ±2 g pk (±19.6 m/s² pk)
  • Electrical Connector: 9-Pin
  • Weight: 0.8 oz (22.7 gm)

RELATED PRODUCTS



037P10

10-conductor shielded cable, 10-ft, 9-socket plug to pigtails



Add to Cart for Quote
Add To Cart
English: SI:
Performance
Sensitivity (±3 %) 1000 mV/g 101.9 mV/(m/s²) [5]
Measurement Range ±2 g pk ±19.6 m/s² pk
Frequency Range (±3 dB) 0 to 400 Hz 0 to 400 Hz [1]
Frequency Range (±3 dB) 0 to 200 Hz 0 to 200 Hz [4]
Phase Response (10 Hz) <3.0 ° <3.0 °
Non-Linearity ≤1 % ≤1 % [2] [3]
Broadband Resolution (0.5) .1 mg rms .001 m/s² rms [1]
Transverse Sensitivity ≤5 % ≤5 %
Environmental
Overload Limit (Shock) ±2000 g pk ±19620 m/s² pk
Temperature Range (Operating) -65 to +250 °F -54.0 to +121 °C
Temperature Range (Storage) -65 to +250 °F -54.0 to +121 °C
Temperature Coefficient of Sensitivity ±5 % ±5 % [6]
Zero g Offset Temperature Coefficient ±4 % FSO ±4 % FSO [2] [6]
Base Strain Sensitivity (Measured at 250 µε) .001 g/µε .01 (m/s²)/µε [1]
Magnetic Sensitivity 100 µg/gauss 9.8 (m/s²)/Tesla [1]
Electrical
Excitation Voltage 6 to 30 VDC 6 to 30 VDC
Current Consumption ≤30 mA ≤30 mA
Output Impedance ≤120 Ohm ≤120 Ohm
Offset Voltage ±160 mVDC ±160 mVDC [7]
Spectral Noise (1) 10 µg/√Hz 98.1 (µm/sec2)/√Hz [1]
Electrical Isolation (Case) >100000000 Ohm >100000000 Ohm
Physical
Housing Material Titanium Titanium
Sealing Hermetic Hermetic
Size - Length 0.85 in 21.6 mm
Size - Width 0.85 in 21.6 mm
Size - Height 0.85 in 21.6 mm
Weight 0.8 oz 22.7 gm
Electrical Connector 9-Pin 9-Pin
Electrical Connection Position Side Side
Mounting Thread 10-32 Female 10-32 Female
* All specifications are at room temperature unless otherwise specified
.


Specification Notes


[1] Typical.
[2] FSO = Full Scale Output over the Measurement Range (4VDC).
[3] Least-squares, straight line method, % FSO.
[4] Minimum, verified with Calibration data.
[5] Measured at 10 Hz, 1.0 pk
[1] Typical.
[2] FSO = Full Scale Output over the Measurement Range (4VDC).
[6] -65 to +250 °F, ref. 75 °F (-54 to +121 °C, ref. 24 °C)
[1] Typical.
[7] Offset tolerance is based on 10 ft of 037 test cable.
[8] See PCB Declaration of Conformance PS027 for details.


Accessories


Supplied
080A12 Adhesive mtg base, 0.75" hex x 0.2" thk, 10-32 tapped hole, aluminum w/insulating hardcoat finish 1
081B05 Mounting stud, 10-32 to 10-32, 0.275" long, BeCu w/shoulder (for series 3713) 1
ACS-145T Triaxial calibration, 3713E, Phase and Magnitude from 2 Hz to 3 dB using log scale (1) 1
M081B05 Mounting stud, 10-32 to M6x0.75-6g, 0.275" long, BeCu (for series 3713) 1