Model: 3711B1150G



MEMS DC accelerometer, 40 mV/g, +/-50 g range, 0 to 1000 Hz, 4-pin connector

No longer in production, current model is 3711F1150G

  • Sensitivity: (±5%) 40 mV/g (4.1 mV/(m/s²))
  • Measurement Range: ±50 g pk (±490 m/s² pk)
  • Broadband Resolution: 6.0 mg rms (0.06 m/s² rms)
  • Temperature Range: -65 to +250 °F (-54.0 to +121 °C)
  • Frequency Range: (±5%) 0 to 1.0 kHz
  • Electrical Connector: 4-Pin

Add this product to my product comparison
Compare selected models ()

 English:SI: 
Performance
Sensitivity (±5 %)40 mV/g4.1 mV/(m/s²) 
Measurement Range±50 g pk±490 m/s² pk 
Frequency Range (±5 %)0 to 1.0 kHz0 to 1.0 kHz 
Frequency Range (±10 %)0 to 1.5 kHz0 to 1.5 kHz 
Resonant Frequency≥5.1 kHz≥5.1 kHz 
Phase Response (100 Hz)<10 °<10 ° 
Broadband Resolution (0.5 to 100 Hz)6.0 mg rms0.06 m/s² rms[2] 
Non-Linearity≤1 %≤1 %[1] 
Transverse Sensitivity≤3 %≤3 % 
Environmental
Overload Limit (Shock)±3000 g pk±29420 m/s² pk 
Temperature Range (Operating)-65 to +250 °F-54.0 to +121 °C 
Temperature Range (Storage)-65 to +250 °F-54.0 to +121 °C 
Temperature Coefficient of Sensitivity±3 %±3 %[4] 
Zero g Offset Temperature Coefficient±2 % FSO±2 % FSO[3][4] 
Base Strain Sensitivity.0001 g/µε.001 (m/s²)/µε[2] 
Magnetic Sensitivity40 µg/gauss3.9 (m/s²)/Tesla[2] 
Electrical
Excitation Voltage6 to 30 VDC6 to 30 VDC 
Current Consumption≤6 mA≤6 mA 
Output Impedance≤100 Ohm≤100 Ohm 
Offset Voltage-40 to +40 mVDC-40 to +40 mVDC[5] 
Spectral Noise (1 to 100 Hz)600 µg/√Hz5890 (µm/sec2)/√Hz[2] 
Electrical Isolation (Case)>100000000 Ohm>100000000 Ohm 
Physical
Housing MaterialTitaniumTitanium 
SealingHermeticHermetic 
Size - Height0.45 in11.4 mm 
Size - Length0.85 in21.6 mm 
Size - Width0.85 in21.6 mm 
Weight0.58 oz16.3 gm 
Electrical Connector4-Pin4-Pin 
Electrical Connection PositionSideSide 
MountingThrough HoleThrough Hole 

All specifications are at room temperature unless otherwise specified.


CE

Product Notes
[1] Zero-based, least-squares, straight line method.
[2] Typical.
[3] FSO = Full Scale Output over the Measurement Range (4VDC).
[4] -65 to +250 °F, ref. 75 °F (-54 to +121 °C, ref. 24 °C)
[5] Offset tolerance is based on 10 ft of 010 test cable.
[6] See PCB Declaration of Conformance PS027 for details.
Accessories:
Supplied
080A152Easy Mount Clip(1)
081A113Mounting screw assembly(2)
ACS-103Phase and Amplitude Calibration from 2 Hz to +5% of frequency range(1)
M081A113Mounting screw assembly(2)
Optional Versions:
No optional versions
Product Documents
Additional Downloads