Model: 355B02

$490.00 USD
(Pricing valid in US only)

Ring-style, general purpose, ceramic shear ICP® accel., 10 mV/g, 1 to 10k Hz, 10-32 side conn.

  • Sensitivity: (±10%) 10 mV/g (1.02 mV/(m/s²))
  • Measurement Range: ±500 g pk (±4900 m/s² pk)
  • Broadband Resolution: 0.0005 g rms (0.005 m/s² rms)
  • Frequency Range: (±5%) 1 to 10000 Hz
  • Sensing Element: Ceramic
  • Weight: 0.35 oz (10 gm)

Add this product to my product comparison
Compare selected models ()

Sensitivity (±10 %)10 mV/g1.02 mV/(m/s²) 
Measurement Range±500 g pk±4900 m/s² pk 
Frequency Range (±5 %)1 to 10000 Hz1 to 10000 Hz 
Frequency Range (±10 %)0.6 to 12000 Hz0.6 to 12000 Hz 
Frequency Range (±3 dB)0.3 to 17000 Hz0.3 to 17000 Hz 
Resonant Frequency≥35 kHz≥35 kHz 
Broadband Resolution (1 to 10000 Hz)0.0005 g rms0.005 m/s² rms[2] 
Non-Linearity≤1 %≤1 %[1] 
Transverse Sensitivity≤5 %≤5 %[3] 
Overload Limit±5000 g pk±49000 m/s² pk 
Temperature Range-65 to +250 °F-54 to +121 °C 
Temperature ResponseSee Graph %/°FSee Graph %/°F[2] 
Base Strain Sensitivity0.05 g/µε0.49 (m/s²)/µε[2] 
Excitation Voltage22 to 30 VDC22 to 30 VDC 
Constant Current Excitation2 to 20 mA2 to 20 mA 
Output Impedance≤100 Ohm≤100 Ohm 
Output Bias Voltage7 to 15 VDC7 to 15 VDC 
Discharge Time Constant0.5 to 2 sec0.5 to 2 sec 
Settling Time (within 10% of bias)<10 sec<10 sec 
Spectral Noise (1 Hz)90 µg/√Hz880 (µm/sec2)/√Hz[2] 
Spectral Noise (10 Hz)15 µg/√Hz147 (µm/sec2)/√Hz[2] 
Spectral Noise (100 Hz)5 µg/√Hz49 (µm/sec2)/√Hz[2] 
Spectral Noise (1 kHz)3 µg/√Hz29 (µm/sec2)/√Hz[2] 
Electrical Isolation (Base)>100000000 Ohm>100000000 Ohm 
Size - Height0.40 in10.2 mm 
Weight0.35 oz10 gm[2] 
Sensing ElementCeramicCeramic 
Sensing GeometryShearShear 
Housing MaterialTitaniumTitanium 
Size - Length0.95 in24.1 mm 
Size - Width0.63 in16.0 mm 
Electrical Connector10-32 Coaxial Jack10-32 Coaxial Jack 
Electrical Connection PositionSideSide 
MountingThrough HoleThrough Hole 

All specifications are at room temperature unless otherwise specified.


Product Notes
[1] Zero-based, least-squares, straight line method.
[2] Typical.
[3] Transverse sensitivity is typically <= 3%.
[4] See PCB Declaration of Conformance PS023 for details.
039A22Allen wrench, 7/64" hex(1)
080A109Petro Wax(1)
081B45Insulated cap screw, 6-32 thd x 5/8" long (for Model 355B02)(1)
ACS-1NIST traceable frequency response (10 Hz to upper 5% point).(1)
Optional Versions:
(A) Adhesive Mount
    080A90Quick Bonding Gel(1)
(M) Metric Mount
    M039A22Allen wrench for use with M3 thread(1)
    M081B45Accessory for Vibration Division Product(1)
(W) Water Resistant Cable
    Electrical Connection PositionSide