Model : 333B50

Click for lead times
$ 380.00 USD
(Pricing valid in US only)

Platinum Stock Products; Modal array, ceramic shear ICP® accel, 1000 mV/g, 0.5 to 3k Hz, 10-32 side conn., 5-40 stud mount

  • Sensitivity: (±10%)1000 mV/g (102 mV/(m/s²))
  • Measurement Range: ±5 g pk (±49 m/s² pk)
  • Broadband Resolution: 0.00005 g rms (0.0005 m/s² rms)
  • Frequency Range: (±5%)0.5 to 3000 Hz
  • Sensing Element: Ceramic
  • Weight: 0.26 oz (7.5 gm)

RELATED PRODUCTS



002C10

General purpose coaxial cable, white FEP jacket, 10-ft, 10-32 plug to BNC plug



Add to Cart for Quote
Add To Cart
003C10

Low-noise coaxial cable, blue TFE jacket, 10-ft, 10-32 coaxial plug to BNC plug



Add to Cart for Quote
Add To Cart
485B39

2-channel, USB-powered, ICP® sensor signal conditioner with USB digital output (24-bit A/D)



Add to Cart for Quote
Add To Cart
English: SI:
Performance
Sensitivity (±10 %) 1000 mV/g 102 mV/(m/s²)
Measurement Range ±5 g pk ±49 m/s² pk
Frequency Range (±5 %) 0.5 to 3000 Hz 0.5 to 3000 Hz
Resonant Frequency ≥20 kHz ≥20 kHz
Phase Response (±5 °) (at 70°F [21°C]) 2.5 to 3000 Hz 2.5 to 3000 Hz
Broadband Resolution (1) 0.00005 g rms 0.0005 m/s² rms [2]
Non-Linearity ≤1 % ≤1 % [1]
Transverse Sensitivity ≤5 % ≤5 % [3]
Environmental
Overload Limit ±4000 g pk ±39000 m/s² pk
Temperature Range 0 to +150 °F -18 to +66 °C
Temperature Response See Graph %/°F See Graph %/°F [2]
Base Strain Sensitivity 0.01 g/µε 0.1 (m/s²)/µε [2]
Electrical
Excitation Voltage 18 to 30 VDC 18 to 30 VDC
Constant Current Excitation 2 to 20 mA 2 to 20 mA
Output Impedance ≤500 Ohm ≤500 Ohm
Output Bias Voltage 7 to 12 VDC 7 to 12 VDC
Discharge Time Constant 0.7 to 2.0 sec 0.7 to 2.0 sec
Spectral Noise (1 Hz) 15 µg/√Hz 150 (µm/sec2)/√Hz [2]
Spectral Noise (10 Hz) 3.8 µg/√Hz 37 (µm/sec2)/√Hz [2]
Spectral Noise (100 Hz) 1.1 µg/√Hz 11 (µm/sec2)/√Hz [2]
Spectral Noise (1 kHz) 0.4 µg/√Hz 3.9 (µm/sec2)/√Hz [2]
Physical
Weight 0.26 oz 7.5 gm [2]
Sensing Element Ceramic Ceramic
Sensing Geometry Shear Shear
Housing Material Titanium Titanium
Sealing Hermetic Hermetic
Size - Length 0.68 in 17.3 mm
Size - Width 0.45 in 11.4 mm
Electrical Connector 10-32 Coaxial Jack 10-32 Coaxial Jack
Electrical Connection Position Side Side
Mounting Thread 5-40 Female 5-40 Female
Mounting Torque 4 to 5 in-lb 45 to 56 N-cm
* All specifications are at room temperature unless otherwise specified
.


Specification Notes


[1] Zero-based, least-squares, straight line method.
[2] Typical.
[3] Transverse sensitivity is typically <= 3%.
[2] Typical.
[4] See PCB Declaration of Conformance PS023 for details.


Accessories


Supplied
080A109 Petro Wax, one square, 1" x 1" x 0.25" 1
080A25 Adhesive base, 0.438" hex, 5-40 tapped hole, aluminum hardcoat (for Series 333B30/B40/B50) 1
080A90 Quick bond Gel (for use with accel adhesive mtg bases to fill gaps on rough surfaces) 1
081A27 Mounting stud, 5-40 to 5-40 thds, w/o shoulder, BeCu 1
ACS-1 Single axis amplitude response calibration from 10 Hz to upper 5% frequency, NIST traceable 1
M081A27 Metric mtg stud, 5-40 to M3 x 0.50 long 1


Optional Versions


( T ) TEDS Capable of Digital Memory and Communication Compliant with IEEE P1451.4
English SI
Output Bias Voltage 7.5 to 13 VDC


( TLA ) TEDS LMS International - Free Format
English SI
Output Bias Voltage 7.5 to 13 VDC


( TLB ) TEDS LMS International - Automotive Format
English SI
Output Bias Voltage 7.5 to 13 VDC


( TLC ) TEDS LMS International - Aeronautical Format
English SI
Output Bias Voltage 7.5 to 13 VDC


( TLD ) TEDS Capable of Digital Memory and Communication Compliant with IEEE 1451.4
English SI
Output Bias Voltage 7.5 to 13 VDC