Products

triax force sensor, reversed shear polarity, 10k lb (fz), 4k lb (fx,y), 15 pc/lb (z), 32 pc/lb (x, y)

Force Sensor, Charge Output, 3-Component

Model 260A33

  • IP

Triax force sensor, reversed shear polarity, 10k lb (Fz), 4k lb (Fx,y), 15 pC/lb (z), 32 pC/lb (x, y)

  • Temperature Range: -100 to +350 °F (-73 to +177 °C)
  • Electrical Connector: 10-32 Coaxial Jack

Specification Notes


[1] Zero-based, least-squares, straight line method.
[2] Sensitivites are for listed preload. Sensitivites may vary ±5% depending on preload used.
[3] Typical.
[4] Preload should be at least 10 times the X and Y operating range used.

English: SI:
Performance
Sensitivity (±15 %) (Z Axis) 15 pC/lb 3.37 pC/N [2]
Sensitivity (±15 %) (X or Y Axis) 32 pC/lb 7.19 pC/N [2]
Measurement Range (Z Axis) 10000 lb 44.48 kN
Measurement Range (X or Y Axis) 4000 lb 17.7 kN
Maximum Force (Z Axis) 11000 lb 48.93 kN
Maximum Force (X or Y Axis) 4400 lb 19.57 kN
Maximum Moment (Z Axis) 240 ft-lb 325.4 Nm
Maximum Moment (X or Y Axis) 325 ft-lb 440.7 Nm
Upper Frequency Limit 39000 Hz 39000 Hz
Non-Linearity ≤1 % FS ≤1 % FS [1]
Cross Talk (between X and Y Axis) ±3 % ±3 %
Cross Talk (between (X or Y Axis) and Z Axis) ±5 % ±5 %
Environmental
Temperature Range -100 to +350 °F -73 to +177 °C
Electrical
Capacitance (all channels) 70 pF 70 pF [3]
Insulation Resistance (all channels) ≥1000000000000 Ohm ≥1000000000000 Ohm
Output Polarity (in direction of markings) Negative Negative
Physical
Preload ≤40000 lb ≤178 kN [4]
Stiffness (X or Y Axis) 11.4 lb/µin 2.0 kN/µm [3]
Stiffness (Z Axis) 38.8 lb/µin 6.8 kN/µm [3]
Size - Height 0.790 in 20.07 mm
Size - Length 2.25 in 57.1 mm
Size - Width 2.25 in 57.1 mm
Size - Bolt Diameter 1 in 25 mm
Size - ID 1.023 in 25.98 mm
Size - Sensing Surface 1.800 in 45.72 mm
Weight 9.88 oz 280 gm
Housing Material Stainless Steel Stainless Steel
Sealing Hermetic Hermetic
Electrical Connector (Quantity, 3) 10-32 Coaxial Jack 10-32 Coaxial Jack
Electrical Connection Position Side Side

* All specifications are at room temperature unless otherwise specified.

Accessories


Supplied
081A71 Pre-load bolt (for Models 260A03, 260A13 & 260A33) 1
082B06 Anti-friction washer for Models (M)206C, (M)216B, (M)260A03, (M)260A13 & (M)260A33 1
083A11 Pilot bushing (for Models 260A03, 260A13, & 260A33) 1

Optional Versions


(M) Metric Mount
Accessories:
Supplied M081A71 Mounting Stud 1

(W) Water Resistant Cable

English SI
Electrical Connection Position Side

Build Out Your Measurement Chain