pcb l&t reaction torque transducer, 50 in-lb/4.2 ft-lb  (5.6 n-m) rated capacity, 50% static overload protection, 2-in (50.8 mm) steel flange

Reaction Torque Sensor

Model 2508-01A

Add to cart for a quote.

PCB L&T Reaction Torque Transducer, 50 in-lb/4.2 ft-lb (5.6 N-m) rated capacity, 50% static overload protection, 2-in (50.8 mm) Steel Flange

  • Measurement Range: 50 lbf-in (5.65 Nm)
  • Sensitivity: 2 mV/V (2 mV/V)
  • Mounting: Flange (#10-24 Bolts) (Flange (No Metric Equivalent))
  • Size - Diameter: 2.0 in (50.8 mm)
  • Size - Length: 3.0 in (76.2 mm)
  • Torsional Stiffness: 2350 lbf-in/radian (265.5 N-m/radian)

Specification Notes


[1] Nominal.
[2] FS - Full Scale.
[3] Singularly applied, i.e. no other extraneous loads.
[4] Over compensated operating temperature range.
[5] Calibrated at 10 VDC, usable 5 to 20 VDC or VAC RMS.
[6] See Drawing 32786 for Complete Dimensions

English: SI:
Performance
Measurement Range (Full Scale Capacity) 50 lbf-in 5.65 Nm
Sensitivity (output at rated capacity) 2 mV/V 2 mV/V [1] [2]
Non-Linearity ≤0.10 % FS ≤0.10 % FS [2]
Hysteresis ≤0.10 % FS ≤0.10 % FS [2]
Non-Repeatability ≤0.02 % FS ≤0.02 % FS [2]
Resonant Frequency 380 Hz 380 Hz
Maximum Torque 75 lbf-in 8.47 Nm
Environmental
Overload Limit (Axial Thrust) 200 lbf 890 N [3]
Overload Limit (Overhung Moment) 50 lbf-in 5.65 Nm [3]
Overload Limit (Shear) 13 lbf 57.8 N [3]
Temperature Range (Operating) -65 to +200 °F -54 to +93 °C
Temperature Range (Compensated) +70 to +170 °F +21 to +77 °C
Temperature Effect on Output (Maximum) ±0.002 %Reading/°F ±0.0036 %Reading/°C [4]
Temperature Effect on Zero Balance (Maximum) ±0.002 %FS/°F ±0.0036 %FS/°C [2] [4]
Electrical
Bridge Resistance 700 Ohm 700 Ohm
Excitation Voltage (Recommended) 10 VDC 10 VDC [5]
Insulation Resistance 5 GOhm 5 GOhm
Zero Balance ≤1.0 %RO ≤1.0 %RO
Output Polarity cw+ cw+
Physical
Size - Diameter 2.0 in 50.8 mm [6]
Size - Length 3.0 in 76.2 mm [6]
Weight 2.0 lb 908 g
Mounting Flange (#10-24 Bolts) Flange (No Metric Equivalent)
Torsional Stiffness 2350 lbf-in/radian 265.5 N-m/radian
Sensing Element Strain Gage Strain Gage
Housing Material (Sensor) Anodized Aluminum Anodized Aluminum
Electrical Connector PT02E-10-6P PT02E-10-6P

* All specifications are at room temperature unless otherwise specified.

Accessories


Supplied
181-012A Mating conn., 6-socket (F) w/strain relief for sensors with PT conn. 1